Abstract:Significant reductions in the fluid structure interaction regulated transfer of impulse occur when sandwich panels with thin (light) front faces are impulsively loaded in water. A combined experimental and computational simulation approach has been used to investigate this phenomenon during the compression of honeycomb core sandwich panels. Square cell honeycomb panels with a core relative density of 5% have been fabricated from 304 stainless steel. Back supported panels have been dynamically loaded in through thickness compression using an explosive sheet to create a plane wave impulse in water. As the impulse was increased, the ratio of transmitted to incident momentum decreased from the Taylor limit of 2, for impulses that only elastically deformed the core, to a value of 1.5, when the peak incident pressure caused inelastic core crushing. This reduction in transmitted impulse was slightly less than that previously observed in similar experiments with a lower strength pyramidal lattice core and, in both cases, was well above the ratio of 0.35 predicted for an unsupported front face. Core collapse was found to occur by plastic buckling under both quasistatic and dynamic conditions. The buckling occurred first at the stationary side of the core, and, in the dynamic case, was initiated by reflection of a plastic wave at the (rigid) back face sheet-web interface. The transmitted stress through the back face sheet during impulse loading depended upon the velocity of the front face, which was determined by the face sheet thickness, the magnitude of the impulse, and the core strength. When the impulse was sufficient to cause web buckling, the dynamic core strength increased with front face velocity. It rose from about 2 times the quasistatic value at a front face initial velocity of 35 m/s to almost 3 times the quasistatic value for an initial front face velocity of 104 m/s. The simulations indicate that this core hardening arises from inertial stabilization of the webs, which delays the onset of their buckling. The simulations also indicate that the peak pressure transmitted to a support structure from the water can be controlled by varying the core relative density. Pressure mitigation factors of more than an order of magnitude appear feasible using low relative density cores. The study reveals that for light front face sandwich panels the core strength has a large effect upon impulse transfer and the loading history applied to support structures.

Underwater impulsive resistance of the foam reinforced composite lattice sandwich structure

Experiment and numerical simulation of anti-penetration performance of composite structures

Dynamic response and failure of carbon/epoxy composite sandwich subjected to underwater impulsive loading

Low-velocity impact properties of foam-filled composite lattice sandwich beams: Experimental study and numerical simulation

Theoretical and Experimental Study of Foam-Filled Lattice Composite Panels under Quasi-Static Compression Loading

Dynamic response of composite sandwich structures with the honeycomb-foam hybrid core subjected to underwater shock waves: Numerical simulations

Experiment and finite element analysis of lattice reinforced composite sandwich panels subjected to low-velocity impact

Experimental and Numerical Analysis of Nonlinear Flexural Behaviour of Lattice-Web Reinforced Foam Core Composite Sandwich Panels

Experimental and theoretical study on the response of the X-frame CFRP sandwich beam under the local impulsive loading

On low-velocity impact response of foam-core sandwich panels

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

The influence of sizing on the compressive performance of foam-reinforced woven lattice sandwich panels

Dynamic fluid-structure interaction of graded foam core sandwich plates to underwater blast

Dynamic Compression of Square Honeycomb Structures During Underwater Impulsive Loading

Foam-filling Techniques to Enhance Mechanical Behaviors of Woven Lattice Truss Sandwich Panels

Enhancing impact resistance of metallic foam core sandwich constructions through encasing high-strength fibrous composites

Energy Absorption of Foam-Filled Lattice Composite Cylinders under Lateral Compressive Loading

Edgewise compressive test and analysis for lattice web reinforced composite sandwich panels with foam core

Crushing behavior and load-reducing performance of a composite structural buffer during water entry at high vertical velocity

Three-dimensional numerical modeling of composite panels subjected to underwater blast

Influence of Geometric Parameters on Flatwise Compression Properties of a Novel Lattice Sandwich