Abstract:Significant reductions in the fluid structure interaction regulated transfer of impulse occur when sandwich panels with thin (light) front faces are impulsively loaded in water. A combined experimental and computational simulation approach has been used to investigate this phenomenon during the compression of honeycomb core sandwich panels. Square cell honeycomb panels with a core relative density of 5% have been fabricated from 304 stainless steel. Back supported panels have been dynamically loaded in through thickness compression using an explosive sheet to create a plane wave impulse in water. As the impulse was increased, the ratio of transmitted to incident momentum decreased from the Taylor limit of 2, for impulses that only elastically deformed the core, to a value of 1.5, when the peak incident pressure caused inelastic core crushing. This reduction in transmitted impulse was slightly less than that previously observed in similar experiments with a lower strength pyramidal lattice core and, in both cases, was well above the ratio of 0.35 predicted for an unsupported front face. Core collapse was found to occur by plastic buckling under both quasistatic and dynamic conditions. The buckling occurred first at the stationary side of the core, and, in the dynamic case, was initiated by reflection of a plastic wave at the (rigid) back face sheet-web interface. The transmitted stress through the back face sheet during impulse loading depended upon the velocity of the front face, which was determined by the face sheet thickness, the magnitude of the impulse, and the core strength. When the impulse was sufficient to cause web buckling, the dynamic core strength increased with front face velocity. It rose from about 2 times the quasistatic value at a front face initial velocity of 35 m/s to almost 3 times the quasistatic value for an initial front face velocity of 104 m/s. The simulations indicate that this core hardening arises from inertial stabilization of the webs, which delays the onset of their buckling. The simulations also indicate that the peak pressure transmitted to a support structure from the water can be controlled by varying the core relative density. Pressure mitigation factors of more than an order of magnitude appear feasible using low relative density cores. The study reveals that for light front face sandwich panels the core strength has a large effect upon impulse transfer and the loading history applied to support structures.

Dynamic response of composite sandwich structures with the honeycomb-foam hybrid core subjected to underwater shock waves: Numerical simulations

Experiment and numerical simulation of anti-penetration performance of composite structures

Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications

Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

On low-velocity impact response of foam-core sandwich panels

Impact Responses and Wave Dissipation Investigation of a Composite Sandwich Shell Reinforced by Multilayer Negative Poisson's Ratio Viscoelastic Polymer Material Honeycomb

Review of sandwich structures under impact loadings: Experimental, numerical and theoretical analysis

Dynamic response and failure of carbon/epoxy composite sandwich subjected to underwater impulsive loading

Performance of Metallic Honeycomb-Core Sandwich Beams under Shock Loading

High-velocity impact response of metallic sandwich structures with PVC foam core

Dynamic Compression of Square Honeycomb Structures During Underwater Impulsive Loading

Crush Dynamics Of Square Honeycomb Sandwich Cores

Underwater impulsive resistance of the foam reinforced composite lattice sandwich structure

Dynamic response of hybrid corrugated/foam sandwich structure under combined loading of blast and fragments

Dynamic response of multilayer sandwich beams with foam-filled trapezoidal corrugated and foam cores under low-velocity impact

Dynamic response of clamped sandwich beams with foam-filled sinusoidal corrugated core subjected to low-velocity impact

Experimental and numerical investigation of low velocity impact response of foam concrete filled auxetic honeycombs

Numerical Simulation of Blast-resistant Performance of Aluminum Foam Sandwich Structures and Optimization

Research on Dynamic Response under the External Impact of Paper Honeycomb Sandwich Board

Internal-structure-model based simulation research of shielding properties of honeycomb sandwich panel subjected to high-velocity impact

High-velocity impact performance of sandwich panels with additively manufactured hierarchical honeycomb cores: An experimental and numerical study