Abstract:Porous scaffolds have recently attracted attention in bone tissue engineering. The implanted scaffolds are supposed to satisfy the mechanical and biological requirements. In this study, two porous structures named MFCC-1 (modified face centered cubic-1) and MFCC-2 (modified face centered cubic-2) are introduced. The proposed porous architectures are evaluated, optimized, and tested to enhance mechanical and biological properties. The geometric parameters of the scaffolds with porosities ranging from 70% to 90% are optimized to find a compromise between the effective Young's modulus and permeability, as well as satisfying the pore size and specific surface area requirements. To optimize the effective Young's modulus and permeability, we integrated a mathematical formulation, finite element analysis, and computational fluid dynamics simulations. For validation, the optimized scaffolds were 3D-printed, tested, and compared with two different orthogonal cylindrical struts (OCS) scaffold architectures. The MFCC designs are preferred to the generic OCS scaffolds from various perspectives: a) the MFCC architecture allows scaffold designs with porosities up to 96%; b) the very porous architecture of MFCC scaffolds allows achieving high permeabilities, which could potentially improve the cell diffusion; c) despite having a higher porosity compared to the OCS scaffolds, MFCC scaffolds improve mechanical performance regarding Young's modulus, stress concentration, and apparent yield strength; d) the proposed structures with different porosities are able to cover all the range of permeability for the human trabecular bones. The optimized MFCC designs have simple architectures and can be easily fabricated and used to improve the quality of load-bearing orthopedic scaffolds. STATEMENT OF SIGNIFICANCE: Porous scaffolds are increasingly being studied to repair large bone defects. A scaffold is supposed to withstand mechanical loads and provide an appropriate environment for bone cell growth after implantation. These mechanical and biological requirements are usually contradicting; improving the mechanical performance would require a reduction in porosity and a lower porosity is likely to reduce the biological performance of the scaffold. Various studies have shown that the mechanical and biological performance of bone scaffolds can be improved by internal architecture modification. In this study, we propose two scaffold architectures named MFCC-1 and MFCC-2 and provide an optimization framework to simultaneously optimize their stiffness and permeability to improve their mechanical and biological performances.

Three Dimensional Optimization of Scaffold Porosities for Bone Tissue Engineering

An Efficient Model for Scaffold-Mediated Bone Regeneration

Optimization of Bone Scaffold Porosity Distributions

Optimizing Bone Scaffold Porosity Distributions

A parameter study on optimal scaffolds in a simple model for bone regeneration

Design of Hierarchical Three-Dimensional Printed Scaffolds Considering Mechanical and Biological Factors for Bone Tissue Engineering

Conceptual design of three-dimensional scaffolds of powder-based materials for bone tissue engineering applications

Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds

An explainable machine learning-based probabilistic framework for the design of scaffolds in bone tissue engineering

Multi-objective Shape Optimization of Bone Scaffolds: Enhancement of Mechanical Properties and Permeability

DESIGN FOR INTERACTION IN INSTRUMENTED ENVIRONMENTS

[Evaluation of ischemic damage in acute myocardial infarct, using the Frank orthogonal leads].

Redefining architectural effects in 3D printed scaffolds through rational design for optimal bone tissue regeneration

Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration

Investigating wall shear stress and the static pressure in bone scaffolds: a study of porosity and fluid flow dynamics

Finite-element design and optimization of a three-dimensional tetrahedral porous titanium scaffold for the reconstruction of mandibular defects.

Endogenous K-ras Signaling in Erythroid Differentiation

Design of 3D printed scaffolds for bone tissue engineering: A review

Computer-Aided Bone Scaffold Design: A Biomimetic Approach

Computational study promoting engineering biomaterial pre-design to well adapt pores distribution on bone/scaffold assembly section

Challenges on optimization of 3D-printed bone scaffolds