Abstract:Porous scaffolds have recently attracted attention in bone tissue engineering. The implanted scaffolds are supposed to satisfy the mechanical and biological requirements. In this study, two porous structures named MFCC-1 (modified face centered cubic-1) and MFCC-2 (modified face centered cubic-2) are introduced. The proposed porous architectures are evaluated, optimized, and tested to enhance mechanical and biological properties. The geometric parameters of the scaffolds with porosities ranging from 70% to 90% are optimized to find a compromise between the effective Young's modulus and permeability, as well as satisfying the pore size and specific surface area requirements. To optimize the effective Young's modulus and permeability, we integrated a mathematical formulation, finite element analysis, and computational fluid dynamics simulations. For validation, the optimized scaffolds were 3D-printed, tested, and compared with two different orthogonal cylindrical struts (OCS) scaffold architectures. The MFCC designs are preferred to the generic OCS scaffolds from various perspectives: a) the MFCC architecture allows scaffold designs with porosities up to 96%; b) the very porous architecture of MFCC scaffolds allows achieving high permeabilities, which could potentially improve the cell diffusion; c) despite having a higher porosity compared to the OCS scaffolds, MFCC scaffolds improve mechanical performance regarding Young's modulus, stress concentration, and apparent yield strength; d) the proposed structures with different porosities are able to cover all the range of permeability for the human trabecular bones. The optimized MFCC designs have simple architectures and can be easily fabricated and used to improve the quality of load-bearing orthopedic scaffolds. STATEMENT OF SIGNIFICANCE: Porous scaffolds are increasingly being studied to repair large bone defects. A scaffold is supposed to withstand mechanical loads and provide an appropriate environment for bone cell growth after implantation. These mechanical and biological requirements are usually contradicting; improving the mechanical performance would require a reduction in porosity and a lower porosity is likely to reduce the biological performance of the scaffold. Various studies have shown that the mechanical and biological performance of bone scaffolds can be improved by internal architecture modification. In this study, we propose two scaffold architectures named MFCC-1 and MFCC-2 and provide an optimization framework to simultaneously optimize their stiffness and permeability to improve their mechanical and biological performances.

Optimizing Bone Scaffold Porosity Distributions

Optimization of Bone Scaffold Porosity Distributions

A parameter study on optimal scaffolds in a simple model for bone regeneration

An Efficient Model for Scaffold-Mediated Bone Regeneration

Three Dimensional Optimization of Scaffold Porosities for Bone Tissue Engineering

Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration

A novel model for porous scaffold to match the mechanical anisotropy and the hierarchical structure of bone

Investigation of Mechanism of Bone Regeneration in a Porous Biodegradable Calcium Phosphate (cap) Scaffold by a Combination of a Multi-Scale Agent-Based Model and Experimental Optimization/validation.

Effect of Rehabilitation Exercise Durations on the Dynamic Bone Repair Process by Coupling Polymer Scaffold Degradation and Bone Formation

Optimizing Design Parameters of PLA 3D-Printed Scaffolds for Bone Defect Repair

Computational study promoting engineering biomaterial pre-design to well adapt pores distribution on bone/scaffold assembly section

Multi-objective Shape Optimization of Bone Scaffolds: Enhancement of Mechanical Properties and Permeability

Natural and Synthetic Polymers for Bone Scaffolds Optimization

Shape optimization of orthopedic porous scaffolds to enhance mechanical performance

Achieving the ideal balance between biological and mechanical requirements in composite bone scaffolds through a voxel-based approach

Optimizing Mass Transfer Performance in Triply Periodic Minimal Surface Porous Scaffolds Through Isosurface Offset

Effect of Structure on Osteogenesis of Bone Scaffold: Simulation Analysis Based on Mechanobiology and Animal Experiment Verification

Symmetry breaking and effects of nutrient walkway in time-dependent bone remodeling incorporating poroelasticity

An explainable machine learning-based probabilistic framework for the design of scaffolds in bone tissue engineering

Design of a Haversian System-Like Gradient Porous Scaffold Based on Triply Periodic Minimal Surfaces for Promoting Bone Regeneration

Design and analysis of the mechanical properties of controllable porous scaffolds for bone tissue engineering