Abstract:Porous scaffolds have recently attracted attention in bone tissue engineering. The implanted scaffolds are supposed to satisfy the mechanical and biological requirements. In this study, two porous structures named MFCC-1 (modified face centered cubic-1) and MFCC-2 (modified face centered cubic-2) are introduced. The proposed porous architectures are evaluated, optimized, and tested to enhance mechanical and biological properties. The geometric parameters of the scaffolds with porosities ranging from 70% to 90% are optimized to find a compromise between the effective Young's modulus and permeability, as well as satisfying the pore size and specific surface area requirements. To optimize the effective Young's modulus and permeability, we integrated a mathematical formulation, finite element analysis, and computational fluid dynamics simulations. For validation, the optimized scaffolds were 3D-printed, tested, and compared with two different orthogonal cylindrical struts (OCS) scaffold architectures. The MFCC designs are preferred to the generic OCS scaffolds from various perspectives: a) the MFCC architecture allows scaffold designs with porosities up to 96%; b) the very porous architecture of MFCC scaffolds allows achieving high permeabilities, which could potentially improve the cell diffusion; c) despite having a higher porosity compared to the OCS scaffolds, MFCC scaffolds improve mechanical performance regarding Young's modulus, stress concentration, and apparent yield strength; d) the proposed structures with different porosities are able to cover all the range of permeability for the human trabecular bones. The optimized MFCC designs have simple architectures and can be easily fabricated and used to improve the quality of load-bearing orthopedic scaffolds. STATEMENT OF SIGNIFICANCE: Porous scaffolds are increasingly being studied to repair large bone defects. A scaffold is supposed to withstand mechanical loads and provide an appropriate environment for bone cell growth after implantation. These mechanical and biological requirements are usually contradicting; improving the mechanical performance would require a reduction in porosity and a lower porosity is likely to reduce the biological performance of the scaffold. Various studies have shown that the mechanical and biological performance of bone scaffolds can be improved by internal architecture modification. In this study, we propose two scaffold architectures named MFCC-1 and MFCC-2 and provide an optimization framework to simultaneously optimize their stiffness and permeability to improve their mechanical and biological performances.

Shape optimization of orthopedic porous scaffolds to enhance mechanical performance

Multi-objective Shape Optimization of Bone Scaffolds: Enhancement of Mechanical Properties and Permeability

Redefining architectural effects in 3D printed scaffolds through rational design for optimal bone tissue regeneration

Design, evaluation, and optimization of 3D printed truss scaffolds for bone tissue engineering

Prototypes for Bone Implant Scaffolds Designed via Topology Optimization and Manufactured by Solid Freeform Fabrication

Multi-parameter design of triply periodic minimal surface scaffolds: from geometry optimization to biomechanical simulation

Optimization of Bone Scaffold Porosity Distributions

Designing Biomimetic 3D-Printed Osteochondral Scaffolds for Enhanced Load-Bearing Capacity

Optimizing Design Parameters of PLA 3D-Printed Scaffolds for Bone Defect Repair

Additively Manufactured Multi-Morphology Bone-like Porous Scaffolds: Experiments and Micro-Computed Tomography-Based Finite Element Modeling Approaches

Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering

Design of novel triply periodic minimal surface (TPMS) bone scaffold with multi-functional pores: lower stress shielding and higher mass transport capacity

Design and 3D Printing of Personalized Hybrid and Gradient Structures for Critical Size Bone Defects

Investigating wall shear stress and the static pressure in bone scaffolds: a study of porosity and fluid flow dynamics

Enhancing scaffold strength through rheological profiling of hydroxyapatite/nano-silica composite ink for advanced additive manufacturing ofbone-mimicking ceramic scaffolds

An explainable machine learning-based probabilistic framework for the design of scaffolds in bone tissue engineering

Bio-mechanical analysis of porous Ti-6Al-4V scaffold: a comprehensive review on unit cell structures in orthopaedic application

A composite polytrimethylene carbonate microsphere-reinforced porous scaffold for osteoblast regeneration

Achieving the ideal balance between biological and mechanical requirements in composite bone scaffolds through a voxel-based approach

Load-adaptive scaffold architecturing: a bioinspired approach to the design of porous additively manufactured scaffolds with optimized mechanical properties

Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs.