Abstract:Manganese-substituted cobalt nano-ferrites, Co(1−x)Mn(x)Fe2O4 (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) were synthesized using chemical co-precipitation method. Physical properties of Co(1−x)Mn(x)Fe2O4 nano-ferrites were then characterized using thermal gravimetric—differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectrometer, transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). TGA/DTA study indicates that the thermal stability of the prepared manganese doped cobalt ferrite nanoparticles. X-ray diffraction patterns of all the prepared ferrite samples show good in quality, pure nanosized, single-phased cubical spinel structures, with ferromagnetic behavior. We demonstrated that the expansion of lattice constant (a) and crystallite size (D) induced by manganese substituted of cobalt ferrites exerted remarkable effects on its structural and magnetic properties. The lattice constant (a) and crystallite size (D) increase with increasing manganese substituted cobalt ferrites. Williamson–Hall (W–H) method was used to evaluate the crystallite size and lattice strain of the Co(1−x) Mn(x)Fe2O4 nanoparticles samples by peak broadening. The calculated crystal size of Co(1−x) Mn(x)Fe2O4 nanoparticles on the W–H plots were highly intercorrelated with the HR-TEM and results of Scherrer Deby equation. The other physical parameters, such as X-ray density, hopping length, ionic radius, bond length, tetrahedral edge, octahedral edge, and unshared octahedral edge values were estimated from the highest intensity peak (311) of X-ray diffraction. The Fourier transform infrared (FT-IR) spectrometer of the Co–Mn ferrite nanoparticles systems were recorded in the frequency range of 200–1000 cm−1. FT-IR spectra show the two fundamental absorption bands of interstitial sub-lattice sites (M–O). The high absorption band (ν1) and the low absorption band (ν2) corresponds to the tetrahedral [A] and octahedral (B) sites, respectively, confirming the formation of single cubic spinel ferrite lattice system. The TEM results show that the ferrite nanoparticles have a nearly spherical shape with some agglomerations. From the analysis of VSM, the values of saturation magnetization (Ms) increases from 31.46 to 37.16 emu/g, then decreases with increasing Mn2+ ions substitution in the Co-ferrite system. The coercivity of the Mn2+ ions substituted cobalt ferrites increases up to x = 0.6 followed by a decrease. The optimized magnetic parameters suggest that the material with composition Co0.6Mn0.4Fe2O4 may be suitable for longitudinal magnetic recording media and other various technological applications.

Characterization of Thermally Stable Bamboo Fiber Sheet Loaded with Cobalt Ferrite Nanoparticles

TaC nanowire/activated carbon microfiber hybrid structures from bamboo fibers

Optimizing the Nano-structure of Magnetic Micro-wires for Multifunctional Macro-composites

In-situ growth of FeCoNi nanoparticles onto 1D bamboo fiber carbon for enhanced electromagnetic wave absorption

Ferromagnetic Fe3O4 Nanofibers: Electrospinning Synthesis and Characterization

Thermal Conductivity and Mechanical Characterization of Bamboo Fiber and Rice Husk/MWCNT Filler Epoxy Hybrid Composite

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

Magnetic Nanoparticles in Biopolymer Fibers: Fabrication Techniques and Characterization Methods

Structure and Physical Properties of Conductive Bamboo Fiber Bundle Fabricated by Magnetron Sputtering

Thermal stability and mechanical behavior of technical bamboo fibers/bio-based polyamide composites

Preparation, structural, magnetic, and AC electrical properties of synthesized CoFe2O4 nanoparticles and its PVDF composites

High-strength superparamagnetic composite fibers

Thermal, microstructural and magnetic properties of manganese substitution cobalt ferrite prepared via co-precipitation method

Preparation and characterization of bamboo based nanocellulose by ball milling and used as a filler for preparation of nanocomposite

Physical and Mechanical Characterization of Bamboo Fiber/Groundnut Shell/Copper Particle/MWCNT-Filled Epoxy Hybrid Polymer Nanocomposites

Influence of Kevlar Hybridization on Dielectric and Conductivity of Bamboo Fiber Reinforced Epoxy Composite

Thermomechanical properties of confined magnetic nanoparticles in electrospun polyacrylonitrile nanofiber matrix exposed to a magnetic environment: Structure, Morphology, and Stabilization (Cyclization)

Controlling the Magnetic Responsiveness of Cellulose Nanofiber Particles Embedded with Iron Oxide Nanoparticles

Comparative Study of Silk-Based Magnetic Materials: Effect of Magnetic Particle Types on the Protein Structure and Biomaterial Properties

Structural, Optical, and Morphological Study of Manganese Substituted Cobalt Ferrite and Its Effect on the Magnetic and Dielectric Properties of PVA Composites

Investigation of Magnetic and Dielectric Properties of Cobalt Cubic Spinel Ferrite Nanoparticles Synthesized by CTAB-Assisted Co-precipitation Method