Abstract:Bamboo–wood composites have found extensive applications in the container flooring, furniture, and construction industries. However, commonly utilized bamboo units such as four-side-planed rectangular bamboo strips and bamboo scrimber suffer from either low utilization rates or high adhesive content. The recently developed bamboo-flattening technology, which employs softening methods with saturated high-pressure steam, may improve the utilization rate and reduce the adhesive content, but its complex processes and high cost restrict its widespread application. This study introduces a novel bamboo–wood composite utilizing high-utilization, easy-to-manufacture bamboo units processed through a straightforward flattening-and-grooving method. However, the stress concentration introduced by the grooving treatment may affect the mechanical properties and stability of the bamboo–wood composites. In order to optimize the mechanical properties and bonding performance, response surface methodology based on a central composite rotatable design was used to map the effects of hot-pressing parameters (time, temperature, and pressure) on the mechanical properties. The bamboo-woodbamboo–wood composites prepared with optimized conditions of 1.18 min/mm pressing time, 1.47 MPa pressure, and a 150 °C temperature had a 121.51 MPa modulus of rupture and an 11.85 GPa modulus of elasticity, which exhibited an error of only ~5% between the experimental and model predictions. Finite element analysis revealed that, in comparison to homogeneous flat bamboo composites, grooved bamboo composites exhibited distinct tensile ductility and toughness due to discontinuous stress fields and alternating rigid–soft layers, which alter the stress transmission and energy dissipation mechanisms. Additionally, grooving treatment not only effectively improved the surface wettability of the bamboo plants, thus enhancing the permeability of the adhesive, but also facilitated adhesive penetration into parenchymal cells and fibers. This led to the formation of a more robust glue–nail structure and chemical bonding.

Manufacture of laminated strand veneer (LSV) composite. Part 1: Optimization and characterization of thin strand veneers

Parallel strand lumber made from pine veneer

A Novel Bamboo–Wood Composite Utilizing High-Utilization, Easy-to-Manufacture Bamboo Units: Optimization of Mechanical Properties and Bonding Performance

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

High-Performance All-Bio-Based Laminates Derived from Delignified Wood

Effect of Structural Design on the Pore Structure, Water Resistance, and Mechanical Properties of Engineered Wood/Bamboo Laminated Composites

Influence of veneer thickness on the properties of LVL from Paricá (Schizolobium amazonicum) plantation trees

Experimental Investigation on Strength and Stiffness Properties of Laminated Veneer Lumber (LVL)

Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses

Optimization of Fiber Orientation and Topology for Curved-Folded Laminated Bamboo Veneer Shells

Effects of manufacturing parameters on mechanical interface properties of thin wood veneer laminates

Fabrication and mechanism analysis of wood polymer composites with improved hydrophobicity, dimensional stability and mechanical strength

Properties of patula pine plywood using phenolic resin-impregnated veneers

High-Strength and UV-Shielding Transparent Thin Films from Hot-Pressed Sulfonated Wood

Study on flexural behaviour of a novel wood composite beam

An Additive Manufacturing Method Using Large-Scale Wood Inspired by Laminated Object Manufacturing and Plywood Technology

Experimental Study On Flexural Behavior Of Glulam And Laminated Veneer Lumber Beams

Effect of Lignosulphonates on the Moisture Resistance of Phenol-Formaldehyde Resins for Exterior Plywood

Toward the modelling of laminated veneer lumber stiffness and the influence of the number of plies

STRUCTURAL ASSESSMENT OF LAMINATED WOOD VENEER/PLASTIC SHEET COMPOSITES USED AS BUILDING MATERIAL

Physical and mechanical properties of laminated timbers used in the construction and furniture industry