Abstract:This study presents a testing campaign aimed at evaluating the strength and stiffness properties of laminated veneer lumber (LVL) specimens. LVL is an engineered wood product composed of thin glued wood veneers whose use in construction for structural applications has increased due to its sustainability and enhanced mechanical performance. Despite LVL's growing popularity, there is a lack of comprehensive information regarding stress-strain responses, failure modes, and the full set of strength and stiffness properties. These are particularly essential when LVL is employed in pure timber structures or composite systems such as steel-timber or timber-concrete load-bearing elements. This research aims to bridge this knowledge gap, focusing on crossbanded LVL panels, known as LVL-C, crafted from Scandinavian spruce wood, which is an LVL product with 20% of crossbanded veneers. The study explores LVL-C mechanical behavior in three primary orthogonal directions: longitudinal, tangential, and radial. A series of mechanical tests, including compression, tension, shear, and bending, was conducted to provide a thorough assessment of the material's performance. In compression tests, different behaviors were observed in the three directions, with the longitudinal direction exhibiting the highest stiffness and strength. Tensile tests revealed unique stress-strain responses in each direction, with gradual tension failures. Shear tests showcased varying shear stress-strain patterns and failure modes, while bending tests exhibited significant strength and stiffness values in flatwise bending parallel to the grain and flatwise bending perpendicular to the grain. This paper summarizes the comprehensive testing results and discusses the obtained strength and stiffness properties of LVL-C panels, providing valuable insights into their mechanical behavior for engineering applications.

Influence of veneer thickness on the properties of LVL from Paricá (Schizolobium amazonicum) plantation trees

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Experimental Investigation on Strength and Stiffness Properties of Laminated Veneer Lumber (LVL)

Parallel strand lumber made from pine veneer

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

Properties of patula pine plywood using phenolic resin-impregnated veneers

STUDY ON THE FEASIBILITY OF VENEER AND PLYWOOD PRODUCTION OF Hevea brasiliensis – CLONE RRIM600

Manufacture of laminated strand veneer (LSV) composite. Part 1: Optimization and characterization of thin strand veneers

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses

Properties of MDF manufactured with mixtures of wood from paricá plantations and wood waste from native Amazonian species

Toward the modelling of laminated veneer lumber stiffness and the influence of the number of plies

Effect of Structural Design on the Pore Structure, Water Resistance, and Mechanical Properties of Engineered Wood/Bamboo Laminated Composites

Physical and mechanical properties of laminated timbers used in the construction and furniture industry

Previous Preservation of Veneers Promotes Higher Preservative Retention and More Effective Protection in CCA-Preserved Plywood

Investigating the influence of fabrication parameters, flax fibre reinforcement, and ageing on interlaminar shear strength in thermoplastic-bonded wood veneers

Assessment of the bonding quality of Australian cedar lamellas for glulam beams produced with different adhesives and surface finishes

Influence of micron-sized oligomeric semisiloxane modification on surface properties of veneer and interfacial adhesion of EVA film/poplar plywood

Experimental Study On Flexural Behavior Of Glulam And Laminated Veneer Lumber Beams

Assessment of Bending Properties of Sawn and Glulam Blackwood in Portugal

Effects of manufacturing parameters on mechanical interface properties of thin wood veneer laminates