Abstract:The dynamic behaviors of gas foil bearing-rotor system are greatly affected by the damping resulting from friction inside foil structure. However, challenges exist in theoretical study when introducing the friction into the dynamic system. This paper presents an effective nonlinear model considering frictional contacts to study the dynamic performance of foil bearing-rotor system. The top foil and bump foil are modeled with the beam elements to consider the sagging effect and bump interactions. Instead of treating the structural damping caused by friction as equivalent viscous damping, the friction force is calculated by utilizing a regularization technique to capture its nonlinear behavior. The simulations are numerically implemented using a direct implicit integration scheme with consideration of unsteady hydrodynamic pressure, rotor motion, deflection of foil structure and their coupling relationships. Using this model, the dissipative characteristics and stability of foil bearing-rotor system are investigated. The results show that the friction leads to hysteretic loops and energy dissipation, and the stick motion becomes more prevalent with the increasing friction coefficient. The dynamic system exhibits rich and complicated nonlinear behaviors. With the change of system parameters, the rotor can experience periodic, quasi-periodic and multi-periodic motions. Only synchronous vibration occurs at low rotational speeds, but large-amplitude subsynchronous vibrations are dominant when rotational speed exceeds the onset speed of instability. Increasing the nominal clearance contributes to avoid the appearance of subsynchronous vibrations, resulting in a more stable system. The predictions can provide guidance for determining the operating and design parameters of foil bearing-rotor system in practice.

Research on Stiffness Damping Characteristics of Sliding Bearing Based on FLUENT

Numerical analysis of sliding bearing dynamic characteristics based on CFD

Stiffness and Damping Coefficients for Journal Bearing Using the 3d Transient Flow Calculation

Main Stiffness and Main Damping of Sliding Bearings Considering Local Contact

Lubrication and stability analysis of nonlinear rotor-bearing system

Influence of Cavitation Pressure on Performance of Sliding Bearings

Application of CFD analysis for rotor-bearing system-double oil grooved round bearing

Research on the Influence of Clearance Variation on the Stiffness Fluctuation of Ball Bearing under Different Operating Conditions

Double Oil Grooved Round Sliding Bearing Performance Analysis with Disturbance

The Calculation of Dynamic Characteristic Coefficients of Fixed_Titing Radial Sliding Bearing

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Analysis of Static Stiffness Fluctuation in Radially Loaded Ball and Roller Bearings

Frictional Analysis on Stiffness and Damping Characteristics of Bump Foil Gas Bearings

An Improved Dynamic Modelling for Exploring Ball Bearing Vibrations from Time-varying Oil Film

Study about the Influence of Cavitation on the Dynamic Characteristics for the Sliding Bearing

Study on Nonlinear Stiffness of Rolling Ball Bearing under Varied Operating Conditions

A nonlinear model for dynamic performance analysis of gas foil bearing-rotor system considering frictional contacts

A Comprehensive Study on the Speed-Varying Stiffness of Ball Bearing under Different Load Conditions

Numerical Calculation Of The Structural Stiffness Of Gas Foil Bearings

An experimental study on oil-film dynamic coefficients

Influence of Fluid Film Boundary Migration on Dynamic Coefficients of Journal Bearings and Behavior of Rotor System