Abstract:Pesticides are used in the agricultural production process to ensure the yield and quality of agricultural products. However, in recent years, environmental pollution issues caused by pesticide residues have sparked widespread concern in society. It is important to develop convenient and efficient approaches to detect and monitor pesticide residues. In this study, targeting benzoylurea insecticides (BUs), polyamidoamine dendrimer-functionalized silica nanocomposite with polydopamine coating (SiO2-PAMAM-PDA) was designed and successfully synthesized. First, monodisperse silica nanoparticles were prepared by the hydrolysis of tetraethyl orthosilicate (TEOS) in mixed solution of ethanol, water and ammonia. The silane coupling agent (3-aminopropyl)triethoxysilane was then employed to introduce amino groups into the silica. Silica with the zeroth generation of polyamidoamine (PAMAM) modification (SiO2-PAMAM-G0) was obtained through Michael addition reaction of methyl acrylate. Ethylenediamine was added to polymerize with methyl acrylate using an amidation reaction to form the first-generation PAMAM (SiO2-PAMAM-G1). Finally, by polymerizing dopamine under alkaline conditions (pH=8.5), the SiO2-PAMAM-G1 was coated with PDA. Thus, the final product named SiO2-PAMAM-PDA was obtained. The composite was characterized using a transmission electron microscope (TEM) and an increase in surface roughness indicated the successful grafting of PDA coating. Dopamine structure contains abundant benzene rings and amino and hydroxyl groups. It could bind with BUs through multiple secondary interactions, such as hydrogen bond and π-π stacking interaction. Therefore, the introduction of PDA could effectively enhance the affinity of the material toward benzoylurea insecticides. The prepared nanocomposites were used as sorbents in a dispersive micro solid-phase extraction approach (D-μ-SPE). The established approach was employed to extract and enrich the BUs in water samples before high-performance liquid chromatography (HPLC) analysis. Diflubenzuron, triflumuron, hexaflumuron, and teflubenzuron were chosen as target analytes. The following was a typical D-μ-SPE procedure. The prepared adsorbents measuring 40 mg were first dispersed in an 8-mL sample solution containing 150 g/L NaCl. The dispersion was assisted by 120-s vortexing to ensure full contact between the SiO2-PAMAM-PDA and the targets. Next, the adsorbents were separated from the liquid phase by 4-min centrifugation (5000 r/min). Thereafter, the adsorbed benzoylureas were eluted using 1 mL acetonitrile as desorption solvent by 120-s vortexing. Separated by centrifugation, the eluate was dried under a mild nitrogen stream. The solid remains were redissolved in 0.1 mL of acetonitrile, filtered by filter membrane (0.22 μm), and then analyzed by HPLC. The experimental conditions in the D-μ-SPE process could have a great impact on the extraction efficiency. Experimental conditions were optimized using a single factor optimization approach to further enhance the extraction recoveries. The optimized conditions included adsorbent amount, extraction time, desorption solvent type, desorption solvent volume, desorption time, and NaCl addition amount. Under the optimal conditions, a linearity range of 10-500 μg/L and limits of detection (LODs, S/N=3) of 1.1-2.1 μg/L were obtained. The extraction recoveries and relative standard deviations (RSDs) of the four BUs were 82.8%-94.1% and 2.1%-8.0%, respectively. The established approach was compared with reported approaches targeting benzoylurea insecticides. It was discovered that this approach consumed less sample, material, organic solvent, and pretreatment time. It provided a more rapid and green choice for the determination of benzoylurea pesticides. To determine the applicability, the proposed approach was applied to analyze the four benzoylurea insecticides in three river water samples. The real water samples were pretreated using the developed approach ahead of instrumental analysis, and no benzoylurea pesticides residue was detected. Next, standard addition experiments were performed under three spiking levels, including 15, 50, and 200 μg/L. The established approach had good accuracy and feasibility with satisfactory recoveries (69.5%-99.4%) and RSDs (0.2%-9.5%).

Polyamidoamine Dendrimer Modified Silica Nanoparticles: A Promising Sorbent for Benzoylurea Insecticides Detection in Tea Infusions

[In-situ solvothermal polymerization of metal-organic framework/carbon-nitrogen nanosheet-coated solid-phase microextraction fiber for highly sensitive detection of pesticide residues in black tea]

Determination of 33 pesticides in tea using accelerated solvent extraction/gel permeation chromatography and solid phase extraction/gas chromatography-mass spectrometry

Magnetic Solid-Phase Extraction of Benzoylurea Insecticides in Tea Samples with Fe3O4-hyperbranched Polyester Magnetic Composite As Sorbent

[Polyamidoamine dendrimer-functionalized silica nanocomposite with polydopamine coating for dispersive micro solid-phase extraction of benzoylurea insecticides in water samples]

A Novel Method Based on Mspd for Simultaneous Determination of 16 Pesticide Residues in Tea by Lc-Ms/Ms

Using Β-Cyclodextrin/attapulgite-immobilized Ionic Liquid As Sorbent in Dispersive Solid-Phase Microextraction to Detect the Benzoylurea Insecticide Contents of Honey and Tea Beverages.

Dispersive Cleanup of Acetonitrile Extracts of Tea Samples by Mixed Multiwalled Carbon Nanotubes, Primary Secondary Amine, and Graphitized Carbon Black Sorbents

Attapulgite Modified Magnetic Metal-Organic Frameworks for Magnetic Solid Phase Extraction and Determinations of Benzoylurea Insecticides in Tea Infusions

Utilizing a novel sorbent in the solid phase extraction for simultaneous determination of 15 pesticide residues in green tea by GC/MS

Extraction of Benzoylurea Insecticides from Tea Leaves Based on Thermoplastic Polyethyleneimine Embedded Magnetic Nanoparticle Carbon Materials

Au-Ag OHCs-based SERS sensor coupled with deep learning CNN algorithm to quantify thiram and pymetrozine in tea

[Modified QuEChERS method based on multi-walled carbon nanotubes coupled with gas chromatography-tandem mass spectrometry for the detection of 10 pyrethroid pesticide residues in tea]

Development of a Zeolite H-ZSM-5-Based D-μSPE Method for the Determination of Organophosphorus Pesticides in Tea Beverages

Liquid Surface-Enhanced Raman Spectroscopy (SERS) Sensor-Based Au-Ag Colloidal Nanoparticles for Easy and Rapid Detection of Deltamethrin Pesticide in Brewed Tea

1-Octyl-3-methylimidazolium Hexafluorophosphate-Functionalised Magnetic Poly Β-Cyclodextrin for Magnetic Solid-Phase Extraction Ofpyrethroids from Tea Infusions.

Pesticide Multi-Residue Analysis in Tea Using D-Spe Sample Cleanup with Graphene Mixed with Primary Secondary Amine and Graphitized Carbon Black Prior to LC–MS/MS

Use of 1-Octyl-3-methylimidazole Hexafluorophosphate Modified Magnetic Hyperbranched Polyamideamine As Sorbent for the Extraction of Pyrethroid Insecticides from Tea Infusion

Development of a specific and sensitive method for the detection of glyphosate pesticide and its metabolite in tea using dummy molecularly imprinted solid-phase extraction coupled with liquid chromatography-tandem quadrupole mass spectrometry

[Preparation of Fe3O4@BA-MOF magnetic solid-phase extraction material and its application to the detection of pesticide residues in tea]

Fabrication of iron oxide@MOF-808 as a sorbent for magnetic solid phase extraction of benzoylurea insecticides in tea beverages and juice samples