Mechanical and permeability characteristics of Q2 soft-plastic loess under coupled hydro-mechanical conditions

Qiuyang Hong,Hongpeng Lai,Yuyang Liu

DOI: https://doi.org/10.1007/s12665-023-11366-4

IF: 2.8

2024-01-10

Environmental Earth Sciences

Abstract:For the soft-plastic loess tunnel engineering, collapse and damage of the surrounding rock during excavation are often driven by the combined action of the seepage water and the unloading effect. Under water pressure and unloading, the soil suffers complex stress-seepage coupling action causing the inevitable change of permeability and mechanical properties. In this paper, seepage control devices were added to the GDS test device, and a new triaxial permeability measurement system was developed. Triaxial unloading–seepage tests were conducted on soft-plastic loess under the effect of hydraulic coupling. The variation of permeability characteristics of Q 2 type soft-plastic loess under lateral unloading and the soil mechanical characteristics under different seepage pressure were analyzed. Meanwhile, microstructure characteristics of soft-plastic loess during the triaxial test were obtained by scanning electron microscope to clarify the deformation and seepage mechanism. The results show that the strength of soft-plastic loess decreases significantly with the increase of osmotic pressure. Under the condition of 50 and 100 kPa osmotic pressure, the cohesive force of soft-plastic loess decreases by 15.5% and 39.0% and the friction angle decreases by 9.4% and 22.6%, respectively. The permeability coefficient of loess increases slowly at first and then increases rapidly during the unloading process. The main reason for the significant increase of permeability coefficient is the penetration of soil fissures and the formation of shear bands after entering the plastic deformation stage.

environmental sciences,water resources,geosciences, multidisciplinary