Abstract:The defects sited on the surface and internal grain boundaries in organic–inorganic hybrid perovskites always capture the carriers and become the recombination centers, causing the decrease in carrier lifetime. Meanwhile, these centers are inclined to become the adsorption sites for water and oxygen, thus leading to the decrease in power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). Herein, a facile strategy is demonstrated by utilizing a self-assembled ammonium salt named phenyltrimethylammonium bromide (PTABr) to modify perovskite films. This way is efficient to passivate the PbI<sub>3</sub><sup>–</sup> antidefects and enhance the stability under air atmosphere conditions. Experiments and theoretical calculations have demonstrated that self-assembled PTABr shows a hydrophobic aliphatic moiety-on orientation on the surface perovskite, effectively reduces the density of the trap state in perovskite film, and enhances the carrier lifetime. The strategy results in the enhancement of both photovoltaic properties and stability of PSCs; the champion PTABr-treated device shows a PCE over 20% and maintains 86% of its initial PCE after 60 days in ambient atmosphere without encapsulation. This method paves a novel way to improve the surface hydrophobicity and promote the overall properties of the device.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02983?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02983</a>.Experimental section; chemical structure of PTABr, ESP map of PTABr, HOMO and LUMO orbitals of PTABr; UV–vis adsorption for untreated and PTABr-treated perovskite film; Tauc plots of perovskite film (a) untreated and (b) PTABr-treated; 2D slices of charge density difference of PTABr adsorbed on the (001) perovskite surface; schematic illustrations of (a) untreated and (b) PTABr-treated device structure for the SCLC; chemical structure of LAD, ESP map of LAD, HOMO, and LUMO orbitals of LAD, the mechanism of LAD-doped PTAA; steady-state JSC output at MPP for the untreated and PTABr-treated devices; statistical distributions of photovoltaic parameters for untreated PSCs and PTABr-treated PSCs; Nyquist plot of pristine and PTABr-treated devices; equivalent circuit employed to fit the Nyquist plots; image of untreated PSCs and PSCs treated in ambient atmosphere for 60 days; HOMO and LUMO orbitals of water molecules; optimized structure of the bare (001) perovskite surface; HOMO orbitals of water adsorbed on untreated and PTABr-treated perovskite surfaces; the TRPL parameters obtained by fitting the PL delaying curves; photovoltaic parameters for different concentrations of PTABr-treated PSCs; a brief summary of HTL/perovskite interface-modified PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02983/suppl_file/sc0c02983_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Self-Assembled Hydrophobic Molecule-Based Surface Modification: A Strategy to Improve Efficiency and Stability of Perovskite Solar Cells

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Molecularly Tailored Surface Defect Modifier for Efficient and Stable Perovskite Solar Cells

Surface treatment of the perovskite via self-assembled dipole layer enabling enhanced efficiency and stability for perovskite solar cells

Surface Passivation with a Fluorocarbon-Based Pyridine Derivative for High-Crystallinity Perovskite Solar Cells with Efficiency Over 20% and Good Humidity Stability

Synergistic Interface Layer Optimization and Surface Passivation with Fluorocarbon Molecules toward Efficient and Stable Inverted Planar Perovskite Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Surface Defect Passivation and Energy Level Alignment Engineering with a Fluorine-Substituted Hole Transport Material for Efficient Perovskite Solar Cells

Highly Stable Perovskite Solar Cells with Protective Layers Obtained via Interfacial Modification

Mechanistic Understanding of Cetyltrimethylammonium Bromide-Assisted Durable CH 3 NH 3 PbI 3 Film for Stable ZnO-Based Perovskite Solar Cells

Tailoring the Interface by a Multifunctional Amphiphilic Molecule Enabled 24.84%-Efficiency and Stable Perovskite Solar Cells

Fluorination of an N,N,N′,N′ -Tetraphenylbenzidine Derivative as a Dopant-Free Hole-Transporting Material for Moisture-Resistant Perovskite Solar Cells

Tailoring of CsPbIBr2 Perovskite Crystallization Via Phenylthiourea for Stable and Efficiency Perovskite Solar Cells

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Enhanced Perovskite Solar Cell Stability and Efficiency via Multi‐Functional Quaternary Ammonium Bromide Passivation

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells

Interfacial Defect Passivation Effect of N -Methyl- N -(thien-2-ylmethyl)amine for Highly Effective Perovskite Solar Cells

Multifunctional molecules of surfactant to support enhanced efficiency and stability for perovskite solar cells

Multifunctional Interface Modification Enables Efficient and Stable HTL-Free Carbon-Electroded CsPbI2Br Perovskite Solar Cells

Reduced defects and enhanced Vbi in perovskite absorbers through synergetic passivating effect using 4-methoxyphenylacetic acid