Abstract:Reactor core components and structural materials of nuclear power plants to be decommissioned have been irradiated by neutrons of various intensities and spectrum. This long term irradiation results in the production of large number of radioactive isotopes that serve as a source of radioactivity for thousands of years for future. Decommissioning of a nuclear reactor is a costly program comprising of dismantling, demolishing of structures and waste classification for disposal applications. The estimate of radio-nuclides and radiation levels forms the essential part of the whole decommissioning program. It can help establishing guidelines for the waste classification, dismantling and demolishing activities. ORIGEN2 code has long been in use for computing radionuclide concentrations in reactor cores and near core materials for various burn-up-decay cycles, using one-group collapsed cross sections. Since ORIGEN2 assumes a constant flux and nuclide capture cross-sections in all regions of the core, uncertainty in its results could increase as region of interest goes away from the core. This uncertainty can be removed by using a Monte Carlo Code, like MCNP, for the correct calculations of flux and capture cross-sections inside the reactor core and in far core regions. MCNP has greater capability to model the reactor problems in much realistic way that is to incorporate geometrical, compositional and spectrum information. In this paper the classification of radioactive waste from the side structural components of a CANDU reactor is presented. MCNP model of full core was established because of asymmetric structure of the reactor. Side structural components of total length 240 cm and radius 16.122 cm were modeled as twelve (12) homogenized cells of 20 cm length each along the axial direction. The neutron flux and one-group collapsed cross-sections were calculated by MCNP simulation for each cell, and then those results were applied to ORIGEN2 simulation to estimate nuclide inventory in the wastes. After retrieving the radiation level of side structural components of in- and ex-core, the radioactive wastes were classified according to the international standards of waste classification. The wastes from first and second cell of the side structural components were found to exhibit characteristics of class C and Class B wastes respectively. However, the rest of the waste was found to have activity levels as that of Class A radio-active waste. The waste is therefore suitable for land disposal in accordance with the international standards of waste classification and disposal.

Design Change and Operational Consideration of the HVAC System during Nuclear Power Plant Decommissioning

Sustainable Decommissioning Strategies for Nuclear Power Plants: A Systematic Literature Review

Application of an Independent Temporary Spent Fuel Storage Pool Cooling System for Decommissioning of Pressurized Water Reactor Kori Units 3 and 4

Γ Dose Rate Estimation and Operation Management Suggestions for Decommissioning the Reactor Pressure Vessel of HTR-PM

Elementary Analysis for the Decommissioning Schedule of High Temperature Reactors

Aerodynamic diameter and radioactivity distributions of radioactive aerosols from activated metals cutting for nuclear power plant decommissioning

A study on the dose evaluation of critical groups for unrestricted reuse of the site after the decommissioning of Kori Unit 1

Intelligent Radioactive Waste Process Cloud-Based System for Nuclear Power Plant Decommissioning

A reform in the helium purification system of the HTR-10: gamma dose rate measurement and suggestions for decommissioning

Characterization of Radioactive Waste From Side Structural Components of a CANDU Reactor for Decommissioning Applications in Korea

Investigation of System Responses of the Maanshan Nuclear Power Plant to the Loss of Residual Heat Removal During Midloop Operation Using a RELAP5/MOD3 Simulation

Evaluation of Worker Radiation Exposure during the Kori Unit 1 Steam Generator Dismantling Process

On the Issues of Fuel Storage and Decommissioning of the HTR-10 Test Reactor

Decommissioning for the Containment Vessel of HTR-PM: Monte Carlo Simulation and Long-Time Predictions

A design of human–machine interface for the two-modular high-temperature gas-cooled reactor nuclear power plant

Performance assessment of HEPA filter against radioactive aerosols from metal cutting during nuclear decommissioning

Pre-conceptual Design Assessment of DEMO Remote Maintenance

The Impact of Full-System Decontamination of Kori Unit 1 on the Radioactive Waste Classification of Steam Generator Tubes

Regulatory Considerations for the Potential Use of a Multi-Stage Validation Testing Approach to Support Human Factors Engineering Technical Reviews for Proposed Nuclear Power Plant Control Room Design Modifications

Dismantling design for a reference research reactor of the WWR type

A State-of-the-Art Review of Radioactive Decontamination Technologies: Facing the Upcoming Wave of Decommissioning and Dismantling of Nuclear Facilities