Abstract:The survivability of the domestic nuclear power industry depends on the cost-competitiveness of safe and secure nuclear power generation. Advanced reactor design concepts aim to have increased safety margins over traditional large light water reactors (LWRs). With increased safety margins comes the potential for a corresponding decrease in off-site risk to the general public from a hypothetical release of radioactivity due to sabotage or theft. Without sacrificing safety or security, advanced reactor designers may be able to achieve operational cost improvements over current LWRs in part by designing less burdensome physical protection systems (PPSs) and by replacing on-site response forces with off-site response forces. To accommodate these developments, the U.S. Nuclear Regulatory Commission is drafting new rulemakings for physical security when licensing through the current frameworks in 10 CFR 50 or 10 CFR 52 along with drafting an entirely new licensing framework: 10 CFR 53. A novel technology-inclusive consequence-informed methodology for the selection of the optimal licensing path for the design of PPSs at advanced fixed-site commercial nuclear power facilities is presented herein. This methodology proposes integrating security considerations at the beginning of a reactor facility design effort to streamline the licensing process. Off-site total effective dose equivalents at the exclusion area and low population zone boundaries were identified as the key metrics when determining a design's most appropriate licensing path that in turn affects the design requirements placed upon the PPS. Given these metrics, source-term generation of potential adversary-induced physics-based sabotage actions utilizing severe accident modeling software and off-site plume dispersal modeling were identified as appropriate for determining siting constraints, potential target sets for hypothetical sabotage events, and their subsequent off-site dose consequences. The methodology proposes using the consequence results from the sabotage modeling, in combination with desired cost-saving PPS characteristics, to help inform the licensing path selection. Once a licensing path is chosen, the methodology utilizes the Design and Evaluation Process Outline to evaluate an effective PPS following the licensing requirements placed on the facility. This paper also presents examples of hypothetical commercial nuclear power facilities with varying consequence levels and demonstrations of how to select the optimal licensing pathways for each.

Regulatory Considerations for the Potential Use of a Multi-Stage Validation Testing Approach to Support Human Factors Engineering Technical Reviews for Proposed Nuclear Power Plant Control Room Design Modifications

Application of a Multi-Stage Testing and Evaluation Approach for a Safety-Related Digital Upgrade at a Nuclear Power Plant

Human Factor Engineering Considerations for the Control Room of Nuclear Power Plant with Multiple Small Modular Reactors

SCENARIO IDENTIFICATION OF THE INTEGRATED SYSTEM VALIDATION FOR THE TWO-MODULAR NUCLEAR POWER PLANT

Research On Software Verification And Validation For Nuclear Power Plant

A Demonstration of the Risk-Informed NEI 18-04 Design Evaluation Model for the Modular High-Temperature Gas Reactor

Development of a simulated main control room (MCR) information display system for AP1000 nuclear power plant

Unique safety features and licensing requirements of the NuScale small modular reactor

Scaling-up assessment of natural circulation phenomena in integral Small Modular Reactor by TRACE code

A Consequence-Informed Licensing Path Selection for the Design of Physical Protection Systems at Commercial Nuclear Power Facilities

Development of a Tool Kit for Integrated System Validation

Design for safety: A cognitive engineering approach to the control and management of nuclear power plants

Exploring the Use of Contingency for Nuclear Electrical Studies

Verification of Alarm Displays for the Nuclear Power Plant with Two Modular High-Temperature Gas-Cooled Reactors

Some considerations for implementing human reliability analysis for advanced reactors

A Model Based System Commissioning Approach for Nuclear Facilities

Causal Model Framework for Nuclear Power Plant Licensing Process

DEVELOPMENT OF A MODEL BASED ASSESSMENT PROCESS FOR QUALIFICATION OF EMBEDDED DIGITAL DEVICES IN NPP APPLICATIONS: RESEARCH APPROACH AND CURRENT STATUS

Feasibility Verification of One Operator Monitoring Two NSSS Modules in Power Plant With Six High Temperature Gas Cooled Reactors Under Accident Conditions

Application of failure mode and effects analysis to validate a novel hybrid Linac QC program that integrates automated and conventional QC testing

An Integrated Risk Assessment Process of Safety-Related Digital I&C Systems in Nuclear Power Plants