Abstract:The separation of lignin from black liquor is an attractive option to consider for pulp mills. In modern pulp mills, lignin extraction offers the opportunity of withdrawing an energy surplus in the form of a solid biofuel. The introduction of lignin separation can de-bottleneck pulp mills in which pulp production is limited by recovery boiler capacity. Separated lignin can be used within the mill, e.g. by replacing fuel oil in the lime kiln or fired in a power boiler, or externally e.g. in CHP plants. Today, only half of the wood material (i.e. the cellulose) is used for the production of valuable products. In a more futuristic perspective, separated lignin can be used as a raw material for the production of green chemicals and/or materials replacing oil as a raw material, thus increasing the value created from the wood material. In this thesis, the extraction of lignin in pulp mills, in particular by precipitation from black liquor, was studied with the focus being on quantifying separation properties of the lignin material. After precipitation, the lignin is filtered and washed. Laboratory studies showed that precipitation and filtration is a rather straight-forward process if the right conditions in terms of pH and temperature are used during precipitation. While lignin precipitated from different softwood kraft black liquors taken from the evaporators showed comparable filtration properties, lignin from membrane concentrated black liquors proved to be more difficult to filter. Direct washing of lignin filter cakes proved to be difficult; problems with plugging and uneven washing, in addition to large yield losses, were encountered. These problems were found to be caused by large gradients in pH and ionic strength in the lignin filter cake during washing. A novel washing method was proposed and developed to solve these problems. This process was investigated in laboratory, bench and pilot scale equipment with excellent results in terms of final purity of the lignin product and very low yield losses during separation. Filtration and washing characteristics were quantified and found to be similar in the three different scales that were studied. During the pilot scale trial, more than 8 tonnes of lignin could be produced using the novel separation method, with high levels of purity ( 60%) and calorific value (LHV 25.4 MJ/kg).

Purification of black alkali liquor by microchannel filtration to promote energy savings and consumption reduction in lye cleaning systems

Mild Alkaline Pretreatment for Isolation of Native-Like Lignin and Lignin-Containing Cellulose Nanofibers (LCNF) from Crop Waste

Treatability Of Kraft Spent Liquor By Microfiltration And Ultrafiltration

Experimental analysis on filter press and energy consumption performance of diaphragm press drying device in chemical post-processing integrated equipment

One-step efficient separation of heavy/light oils, dyes and water by simple filtration with a 3D architecture of functional mesh and sisal fiber felt

Application of Optimized Microchannel Separator to Maximize the Reuse Efficiency of Purified Water in the Petrochemical Industry

Efficient removal of acid from sulfuric acid alkylation reaction products by fiber coalescence technique: Lab-scale and industrial experiments

Design and optimization of the continuous separation process for lignin and alkali by 'Extended Separation Volume' method

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

The treatment of black liquor from straw pulp by electrolytic process

Experimental Study on the Recovery of Lignin from Black Liquor by Blade Dynamic Cross-Flow Filtration Device

Turning Tissue Waste into High-Performance Microfiber Filters for Oily Wastewater Treatment.

Application of Inorganic Membranes in the Alkali Recovery Process

Study on the Filtration Parameters of Inorganic Membrane for Black Liquor Treatment

Precipitation and separation of lignin from kraft black liquor

Membrane Separation of Paper-Making Black Liquor Pollutants

Pilot-scale nanofiltration and techno-economic evaluation of lignin recovery from kraft black liquor

Concentration and Re-Use of Tannery Dyeing-Fatliquoring Effluent by Ultrafiltration

Dye sieving and dye/salt separation PEI-based loose nanofiltration membrane modified by NH 2 -MIL-101(Fe) and polyphenol coating

Construction of Gradient SA-TiO2 Hydrogel Coated PVDF-g-IL Fibre Membranes with High Hydrophilicity and Self-Cleaning for the Efficient Separation of Oil-Water Emulsion and Dye Wastewater

Study on pollution control of microfiltration in reusing dyeing and printing wastewater