Abstract:Producing clean water by the harmless treatment of complex wastewater containing oils and organic pollutants (e.g., dyes) is highly desirable, but the major challenge is the lack of a simple, effective and low-cost way to remove simultaneously heavy oil, light oil and dyes. Here, we designed and constructed a three-dimensional architecture (3D-A) composed of the hydrophilic or hydrophobic functionalized copper mesh (as the upper layer) and the sisal fiber felts (SFs) modified with Mg/Fe-LDH or magnesium silicate (MgSi) (as the bottom layer), and confirmed that clean water was produced through filtering complex wastewater with the 3D-A in one step. For heavy oil/dyes wastewater, the dye solution in it can be trapped by hydrophobic mesh, while heavy oils passed through the mesh. The heavy oils were collected, while the dye solution flows into the light oils/dye mixed solution for further separation. The hydrophilic mesh may trap light oils in light oil/dyes wastewater, and allow dye solution to penetrate the mesh by gravity with a stable high flux [>18000 L/(m2·h)] and high oil–water separation efficiency of 99%. The light oils were collected, while the dye solution flows into the modified SFs layer. The Mg/Fe-LDH modified SFs and MgSi-modified SFs can capture above 99.9% of Congo red (CR) and Methylene blue (MB) dyes, respectively to obtain clean water, and each kilogram of Mg/Fe-LDH@SFs and MgSi@SFs adsorbents can treat 9400 and 18000 kg dye wastewater, respectively. The meshes are very stable and antifouling, and can resist acid and alkaline condition (pH 1 ∼ 13), as well as mechanical scratch. The 3D-A also shows high efficiency in purifying real oily emulsion wastewater from the iron and steel industry to produce clean water, and the used SFs can be easily regenerated for cyclic use in purification of dye wastewater.

Turning Tissue Waste into High-Performance Microfiber Filters for Oily Wastewater Treatment.

Highly Biocompatible, Underwater Superhydrophilic and Multifunctional Biopolymer Membrane for Efficient Oil–Water Separation and Aqueous Pollutant Removal

Effective and low fouling oil/water separation by a novel hollow fiber membrane with both hydrophilic and oleophobic surface properties

Recyclable superhydrophilic meshes with scalable and robust coating for separating oily wastewater

An expanding horizon: Recyclable dual-functional size-adjusted fluorinated mesh devices for large-scale oily wastewater remediation

Waste cigarette filter as nanofibrous membranes for on-demand immiscible oil/water mixtures and emulsions separation

One-step in-situ fabrication of carbon nanotube/stainless steel mesh membrane with excellent anti-fouling properties for effective gravity-driven filtration of oil-in-water emulsions

Designing High-Caliber Nonwoven Filter Mats for Coalescence Filtration of Oil/water Emulsions

Green Fabrication of Superhydrophilic/Underwater Superoleophobic Composite Membrane for High-Efficiency Oil/Water Separation in Harsh Environments

Biodegradable electrospinning superhydrophilic nanofiber membranes for ultrafast oil-water separation

One-step efficient separation of heavy/light oils, dyes and water by simple filtration with a 3D architecture of functional mesh and sisal fiber felt

Polymer-Decorated Filter Material for Wastewater Treatment: in Situ Ultrafast Oil/Water Emulsion Separation and Azo Dye Adsorption.

Fabrication of a superhydrophilic/underwater superoleophobic stainless steel mesh for oil/water separation with ultrahigh flux

Solvent-tolerant lignosulfonate-attapulgite/calcium carbonate coating on nylon filter mesh for oily water treatment

Robust paper-based materials for efficient oil–water emulsion separation

Acrylic acid-grafted pre-plasma nanofibers for efficient removal of oil pollution from aquatic environment

Fabrication of Highly Durable and Robust Superhydrophobic-Superoleophilic Nanofibrous Membranes Based on a Fluorine-Free System for Efficient Oil/water Separation

Chitosan-coated filter paper with superhydrophilicity for treatment of oily wastewater in acidic and alkaline environments

Biomimetic Durable Multifunctional Self-Cleaning Nanofibrous Membrane with Outstanding Oil/Water Separation, Photodegradation of Organic Contaminants, and Antibacterial Performances

Self-Locked and Self-Cleaning Membranes for Efficient Removal of Insoluble and Soluble Organic Pollutants from Water.

Electrospun Nanofibrous Membranes: An Effective Arsenal for the Purification of Emulsified Oily Wastewater