Abstract:TiO2/SBA-15 catalysts, TiO2 nanoparticles well dispersed on SBA-15 supporter, have been successfully obtained through a self-assembly aging, carboxylation and subsequent solvothermal process. Firstly, P123 (PEG-PPG-PEG), KCl, (2-cyanoethyl) triethoxysilane (CETES) and tetraethoxysilane (TEOS) were employed to form cyano-modified SBA-15 (CN/SBA-15) in 2.0 mol/L HCl solution by Self-assembly aging method. Secondly, carboxyl-modified SBA-15 (COOH/SBA-15) was got through carboxylation treatment in 48% H2SO4 solution at 95 degrees C for 24 h. Finally, highly dispersed TiO2/SBA-15 catalysts were successfully synthesized via solvothermal method at 220 degrees C for 12 h using COOH/SBA-15 and tetrabutyl titanate (TB) as raw materials. In order to remove the organic compounds and improve the crystallization of TiO2, the obtained TiO2/SBA-15 catalysts then were filtrated, washed by absolute ethanol for three times, dried at 80 degrees C and calcined at 550 degrees C for 4 h. Notably, the self-assembly and carboxylation process produced large number of good dispersive carboxyl groups (COOH) on SBA-15, which could effectively anchored TB molecules on SBA-15 to promise the highly dispersion of TiO2 on SBA-15. The obtained TiO2/SBA-15 catalysts have been characterized by X-ray diffraction (XRD), Raman spectrum, Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), nitrogen adsorption and UV-Visible diffuse reflectance spectroscopy (UV-Vis). Above results indicate that the TiO2/SBA-15 catalysts exhibit large specific surface area and TiO2 on SBA-15 supporter is anatase phase, they are both play important roles in photocatalytic application. In the current manuscript, the photocatalytic reduction of CO2 under UV light irradiation as a prober reaction was used to investigate the photocatalytic performance of TiO2/SBA-15 catalysts. It was found that the obtained catalysts performed high photocatalytic capacity for CO2 reduction, especially when the loading amount of TiO2 was around 16.5 wt% [n(COOH)/n(TB)=3], the methanol production got maximum which could reach 80 mu mol/g-catalyst after 6 h UV light irradiation. Compared with the catalysts which synthesized through simple impregnation method, our TiO2/SBA-15 catalysts showed the higher activity in photocatalytic reduction of CO2, owing to the better dispersion and crystallization.

Preparation of CuO-Bi2O3/SiO2@TiO2 core-shell structured catalysts and its catalytic performance for synthesis of 1, 4-butynediol by ethynylation of formaldehyde

The preparation of CuM/SiO2 (M=Bi, Mg, Mn) catalysts applied in ethynylation of formaldehyde for 1,4‐butynediol synthesis: the positive interface effect of CuO and Bi2O3

Construction of a Copper-Bismuth Catalyst Featuring Bi-N4 Sites and Synergistic Bi Clusters Derived from TCPP(Bi)@HKUST-1 for Enhanced Formaldehyde to Butynediol

Synergy of CuO/C3N4 interface and CuO nanoparticles in the ethynylation of formaldehyde for 1,4-Butynediol synthesis

Effect of preparation method and CuO promotion in the conversion of ethanol into 1,3-butadiene over SiO₂-MgO catalysts

Preparation of Highly Dispersed Cu Catalysts from Hydrotalcite Precursor for the Dehydrogenation of 1,4-Butanediol

Cu–Zn Catalysts Derived From ZIF‐8 Applied in Ethynylation of Formaldehyde for 1,4‐Butynediol Synthesis: The Positive Effect of Carbon Layers

Bimetallic Synergy Effects of Phyllosilicate-Derived NiCu@SiO2 Catalysts for 1,4-Butynediol Direct Hydrogenation to 1,4-Butanediol

Catalytic Performance and Texture of Teos Based Cu/Sio2 Catalysts for Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

The Structure, Morphology and Catalytic Performance of a Silica Supported Cu Catalyst for Ethylene Glycol Synthesis

Preparation and catalytic performance of NiO-MnO2/Nb2O5-TiO2 for one-step synthesis of 2-ethylhexanol from n-butyraldehyde

Ni-Based Hydrotalcite (HT)-Derived Cu Catalysts for Catalytic Conversion of Bioethanol to Butanol

Textural Structure Effect Of Sio2 On The Catalytic Performance For Hydrogenation Of Dimethyl Oxalate To Ethylene Glycol Over Different Cu-Based Catalysts

Synthesis of Titanium Silicon Composite Oxide Supported Cobalt Oxide Catalyst and Its Catalytic Performance for p ‐ Diethylbenzene Oxidation

Catalytic Hydrogenation of γ-Butyrolactone to Butanediol over a High-Performance Cu-SiO2 Catalyst

Preparation of Γ-Butyrolactone from 1,4-Butanediol Dehydrogenation over Cu/ZnO/Al2O3 Catalyst

CuO-ZnO/Al2O3 catalysts for one-step synthesis of isobutyraldehyde from methanol and ethanol

Complete Liquid Phase Preparation and Characterization of CuZnAlSi Catalysts for DME Synthesis in Slurry Reactor

Formic acid assisted synthesis of Cu-CuO-ZnO composite catalyst for acceptor free selective dehydrogenation of 1, 4-butanediol to γ-butrylactone

Enhanced Performance and Stability of a Trimetallic CuZnY/SiBEA Catalyst in Ethanol to Butadiene Reaction by Introducing Copper to Optimize Acid/Base Ratio

Synthesis of Supported TiO2/SBA-15 Catalysts and Their Performance on Photocatalytic Reduction of CO2