An Approach to Prepare Novel Tisi2 Alloy for Clean Utilization of Spent V2o5-Wo3/Tio2 Catalysts and Diamond-Wire Silicon Slitting Powder
Zhanchao Li,Wenhui Ma,Shiding Wang,Jianzhou Li,Yun Lei
DOI: https://doi.org/10.1016/j.seppur.2024.129347
IF: 8.6
2025-01-01
Separation and Purification Technology
Abstract:Spent V2O5-WO3/TiO2 catalysts (SVWTCs) and diamond-wire silicon slitting powder (DWSSP) are two solid wastes produced in modern industries that are important secondary resources for Ti, W, V, and Si. In this study, a new technological approach is proposed to simultaneously reutilize SVWTCs and DWSSP to recover Ti, W, V, and Si and prepare a novel TiSi2 alloy. First, raw Si-Ti alloys (containing W and V) are synthesized by extracting Ti, W, and V from SVWTCs using DWSSP as an inexpensive reducing agent. The main impurity, O, in DWSSP is eliminated using the CaO-SiO2-TiO2-MgO molten slag formed by SVWTCs, and the highest O removal rate from DWSSP is 99.8 %, while the highest Ti, W, and V extraction rates from SVWTCs are 95.3 %, 96.4 %, and 97.3 %, respectively. Subsequently, a novel TiSi2 alloy with a purity of 99.96 f 0.01 % is obtained via the separation and purification of the raw alloy using vacuum electromagnetic directional crystallization (VEDC), and the impurities Fe, Ni, Al, Ca and Mg are effectively removed from the raw alloy with removal rates of 91.3 f 1.3 %, 82.8 f 2.1 %, 94.1 f 0.7 %, 99.1 f 0.2 %, and 99.3 f 0.1 %, respectively. Finally, the prepared novel TiSi2 alloy is characterized by good conductivity, low-density, enhanced Vickers hardness, and high compressive strength (162.8 MPa), making it a promising raw material for highly conductive machinable materials. The innovative method introduced in this study for preparing high-performance TiSi2 alloy utilizing two solid wastes, SVWTCs and DWSSP, is cost-effective, efficient, and environmentally friendly.