Abstract:The reactor coolant pump is a key equipment in a nuclear power plant. If the leakage exceeds a certain threshold, it may cause reactor overheating and shutdown. The reactor coolant pump leakage fault usually has two problems: corrosion and scaling. Accurately and efficiently diagnosing the leakage fault mode as early as possible and predicting its remaining useful life (RUL) are important for taking timely maintenance measures. In this paper, an integrated method is proposed. First, the cross-sectional area of the first seal is extracted as a fault indicator. The motivation is that corrosion may enlarge the cross-sectional area, and scaling may reduce the cross-sectional area. Based on the fluid mechanics theory, an integrated model with several uncertain parameters is established among the cross-sectional area, temperature, and leakage at the inlet and outlet of the first seal. In the diagnosing process, a modified change-detection method is proposed to detect the starting point of degradation. Then, the unknown parameters in the previous relation are estimated, and the degrading data before the starting point of degradation are used to diagnose the leakage fault mode. Second, a time-series model of the autoregressive integrated moving average (ARIMA) is established to predict the remaining useful life based on the degrading data after the starting point of degradation. Finally, the leakage degrading data from six reactor coolant pumps of a nuclear power plant is used to perform the leakage fault mode diagnosis and life prediction with degradation point detection error rates not exceeding 4%, fault mode diagnosis correction rates 100% and practical RUL predicting results, which proves that the proposed integrated method is accurate and efficient. The proposed integrated method combines the advantages of both the physical model diagnosis and the data-driven model diagnosis and innovatively make use of the quantity of flow from the output side of the primary pump as the monitoring indicator and the cross-sectional area as the characteristic index together to diagnose the leakage fault mode happened to the seal and predict its RUL, which can meet the needs of actual operation and maintenance to ensure a healthy and stable operation of the pump and prevent unexpected shutdowns of nuclear power plants and serious accidents.

Proposal and Validation of a Diagnosis Method of Fuel Failures in Pressurized Water Reactor Nuclear Power Plants

Card fault diagnosis of the pressurized water reactor off-heap nuclear measurement system based on expert experience and convolutional neural network

Study on In-Service Inspection of Nuclear Fuel Assembly Failure Using Ultrasonic Plate Wave

Fault Diagnosis And Prevention Of Flow Sensor For Fuel Supply System

A Framework for Monitoring and Fault Diagnosis in Nuclear Power Plants Based on Signed Directed Graph Methods

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

An Improved Method for PWR Fuel Failure Detection Using Cascade-forward Neural Network With Decision Tree

Diagnosis of Operational Failures and On-Demand Failures in Nuclear Power Plants: an Approach Based on Dynamic Bayesian Networks

An integrated method for the leakage fault mode diagnosis and life prediction of the reactor coolant pump

Comprehensive Evaluation Method for Repairable System Reliability of Power Plant Diesel Engine

Reliability Analysis of Nuclear Power Plant Electrical System Considering Common Cause Failure Based on GO-FLOW

CFD Study on Mechanisms of Fission Gas Burst Release from Defective Fuel Rods of a Typical PWR

CFD Simulation of Fission Gas Release under Fuel Defects Condition in Pressurized Water Reactor

Health Diagnosis of Nuclear Power Plant

Experimental and Numerical Study on the Oxidation and Melting Behaviors of Annular Fuel Rod under High Temperature Steam Condition

Detection of Fuel Failure in Pressurized Water Reactor with Artificial Neural Network

Research on Advanced Pressurized Water Reactor Fuel Management Calculation Method and Program Development

Investigation of the Fuel Element Damage Monitoring Technology in HTGRs and PWRs

A NEW SAFETY ANALYSIS METHOD OF CONTROL ROD EJECTION ACCIDENT IN PWR NPP BASED ON THE FAILURE OF CAUSAL RELATIONSHIP

A hybrid fault diagnosis methodology with support vector machine and improved particle swarm optimization for nuclear power plants

Data-driven fault diagnosis method for the safe and stable operation of solid oxide fuel cells system