Abstract:Due to their merits of low areal density, in-orbit deploying and low manufacturing cost properties, membrane-like deformable mirrors meet the ultra-lightweight and large aperture demand of space optical mirror systems well. Membrane-like mirrors has therefore become a hot spot in the field of space science research now. Surface of these in-orbit membrane-like structures are susceptible to external environment variation on account of their low stiffness and high flexibility properties. Once excited by external excitations, the membrane vibration endures and this would not only degrade its performance, but also lead to system or structural failures. So dynamic vibration control of the membrane-like mirror is indispensable. When the orbiting mirror passes from Earth’s shadow into sunlight, the surface temperature of the mirror changes and this will render membrane thermal distortion. Hence, quasi-static surface error adjustment of the mirror is also requisite. In this paper, a 0.2m diameter scaled-down Kapton membrane-like mirror is taken as the experiment subject. Polyvinylidene Fluoride (PVDF) patches are laminated on the non-reflective side of the mirror as in-plane actuators. High precision laser displacement sensors are used to measure the surface deviation of the mirror. A modal vibration control system based on the positive position feedback (PPF) algorithm and a quasi-static surface control system based on the proportional error feedback algorithm are established respectively. Several mirror control experiments are performed and the results indicate that the methods proposed could suppress the membrane vibration and alleviate the membrane thermal deformation effectively.

Optimization of the Reflective Surface Shape of a Variable Curvature Mirror

Sensitivity Study on Optimizing Thickness Distribution for a Membrane Reflector

Design of reflective lens with Zernike polynomial free form surfaces

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

An Overview of Radial Supporting Ways for Large-Size Movement Mirror: a Case Study of a Large-Aperture Rotating Prism

Structural optimization of a space mirror to selectively constrain optical aberrations

The Optimization of a Convex Aspheric Lightweight SiC Mirror and Its Optical Metrology

The Optimization Design of a Lightweight 2 m SiC Mirror for Ground-Based Telescopes

Highly compact optical design of an off-axis three-mirror system with freeform surfaces

Rear view mirror in the shape of a Bezier surface

Experiments on Quasi-Static and Dynamic Control of a PVDF Laminated Membrane-Like Mirror

Rear View Mirror in the Shape of a Bzier Surface

Optimal design and analysis of a space lightweight mirror with a directionally oriented 2.5D-CVT structure

Research on mirror surface shape of space camera fitting based on SVD

Optomechanical analysis of the mounting performance of large laser transport mirrors

Design of freeform mirrors in Czerny-Turner spectrometers to suppress astigmatism.

A Support Structure for A Compliant Deformable Mirror

Advances in very lightweight composite mirror technology

Optimizing Design of the Cat's Eye Cavity in a Nanometer Laser Ruler

Membrane based Deformable Mirror: Intrinsic aberrations and alignment issues

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility