Abstract:We reported the preparation and electrochemical properties of fluorinated mesoporous carbon foams (F-MCFs) for application as electric double-layer capacitors (EDLCs). By using fluorinated resol which was obtained from the polymerization of formaldehyde, phenol, and 3-fluorophenol as the carbon source and fluorin precursor, and triblock copolymer F127 as a template, F-MCFs were prepared through evaporation induced self-assembly strategy. The F-MCFs were characterized by N 2 adsorption and desorption, transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). The results indicate that the F-MCFs possess highly ordered mesostructure with a specific surface area of 675 m 2 /g, a uniform pore size of 2.2 nm and a pore volume of 0.12 cm 3 /g. The wettability of F-MCFs was investigated by contact angle analysis. The contact angle of F-MCFs for water is 111.5 o , much lower than that of mesoporous carbon foams (MCFs) (141 o ), indicating that the surface wettability of F-MCFs is improved by the introduction of fluorin into the carbon matrix. The enhancement of wettability would increase the surface contact of electrolyte and electrode and accelerate the ion transfer within the pore channel, and thus improve the electrochemical properties of F-MCFs. The electrochemical properties of the F-MCFs have been investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge in electrolyte of 6 mol/L KOH with a three-electrode system. F-MCFs present linear galvanostatic charge-discharge curve at a loading current of 10 mA, and possess good charge-discharge efficiency over 98%. The specific capacitance of the F-MCFs is 220 F/g, significantly higher than that of the MCFs (140 F/g). F-MCFs show important prospect as electrode materials for the application in EDLCs.

Porous carbon with tailored pore size for electric double layer capacitors application

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

The Structural Optimization and High Electrochemical Behavior of Porous Carbons by Graphitization in Molten Sodium Metals

Preparation and Electrochemical Properties of PF-based Activated Carbon

Preparation of Mesoporous MgO-templated Carbons from Phenolic Resin and Their Applications for Electric Double-Layer Capacitors

Hierarchical porous carbon applied in electric double layer capacitor

Preparation and Electrochemical Properties of Fluorinated Mesoporous Carbon Foams for Electric Double-Layer Capacitors

“Egg-Box”-Assisted Fabrication of Porous Carbon with Small Mesopores for High-Rate Electric Double Layer Capacitors

Synthesis and Electrochemical Performance of A Laminated Hollow Porous Carbon

Hierarchical Porous Carbon Hollow-Spheres As a High Performance Electrical Double-Layer Capacitor Material

Preparation of Porous Doped Carbons and the High Performance in Electrochemical Capacitors

Facile Synthesis of Nitrogen-Containing Porous Carbon As Electrode Materials for Superior-Performance Electrical Double-Layer Capacitors

Activated Porous Carbon Spheres with Customized Mesopores Through Assembly of Diblock Copolymers for Electrochemical Capacitor

Hierarchical porous carbon derived from carboxylated coal-tar pitch for electrical double-layer capacitors

A novel mesoporous carbon with straight tunnel-like pore structure for high rate electrochemical capacitors

Regulation of the mesopore proportion of porous carbon for optimizing the performance of electric double layer capacitors

Preparation of Mesophase-Pitch-based Activated Carbons for Electric Double Layer Capacitors with High Energy Density

Preparation of porous carbon electrodes from semen cassiae for high-performance electric double-layer capacitors

Monolithic Porous Carbon Derived from Polyvinyl Alcohol for Electrochemical Double Layer Capacitors

Oxygen-rich Hierarchical Porous Carbon Derived from Coal Tar Pitch for Superior Electric Double Layer Capacitor Application

Synthesis of 3D Hierarchical Porous Carbon As an Electrode Material for Electric Double Layer Capacitors