Abstract:Porous electric double-layer capacitors were prepared successfully with acetylene black and PTFE, where acetylene black was used as electrode precursor and PTFE as a binding. The acetylene powder and the electrode microstructure were measured by both TEM and SEM respectively. The charge-and-discharge curves were measured using a charge/discharge meter. In conclusion, the specific capacitance of the double-layer capacitors increased with the decrease in preparation pressure of the electrode due to increasing both the proportion of the effective micro-pores and the available surface. As the preparation pressure decreased from 48MPa to 16MPa, 17% of the specific capacitance was increased. However, when the pressure was above 48MPa, the capacitance had almost no change with decreasing preparation pressure because the pressure affected hardly on available surface. Moreover, the specific capacitance increased with decreasing PTFE binding due to the increase in available surface. 46% of the specific capacitance was actively ascended as PTFE decreased from 14% to 6%. In addition, the charge density increased, hence the chargeable voltage increased with the increase in available surface because of high preparation pressure. Likewise, the charge density might increase and the chargeable voltage then increased with the increase in concentration of the electrolyte. Both the charge and the discharge behaviors of the double-layer capacitor were directly related to both the distribution and size of electrode pores. The capacitor discharge slowly first and then speedily while the proportion of the micro-pores increased with increasing preparation pressure.

Fabrication and Properties of Double-layer Capacitor with Acetylene Black Electrode

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

Preparing technique optimization and performance of double-layer capacitor

Porous carbon with tailored pore size for electric double layer capacitors application

Double layer capacitor made from actived carbon

Preparation of Mesophase-Pitch-based Activated Carbons for Electric Double Layer Capacitors with High Energy Density

Preparation and Electrochemical Properties of PF-based Activated Carbon

Activated Carbon Fiber Cloths As Electrodes for High Performance Electric Double Layer Capacitors

Effect of Organic Electrolytes on Properties of Electrochemical Double-Layer Capacitor

The Effect of Pre-Carbonization of Mesophase Pitch-Based Activated Carbons on Their Electrochemical Performance for Electric Double-Layer Capacitors

DOUBLE LAYER CAPACITOR MADE FROM ACTIVATED CARBON FIBERS

Some Effects of Textural Properties of Carbon Fibers from Phenolic Resins on Double-Layer Capacitance in Aprotic Electrolyte

Acetylene black agglomeration in activated carbon based electrochemical double layer capacitor electrodes

Effect Of The Surface Chemistry Of Activated Carbon On Its Electrochemical Properties In Electric Double Layer Capacitors

Effect of Pore Structure of Activated Carbon on Its Electrochemical Performance in Non-Aqueous Electrolyte

Organic double-layer capacitor with high surface area electrodes

Performance of Electric Double Layer Capacitors Using Active Carbons Prepared from Petroleum Coke by Koh and Vapor Re-Etching

Influence of Pore Structure of Coal-based Activated Carbons on Electric Double Layer Capacitance

High-Performance Activated Carbons for Use in the Electrodes of Electric Double-Layer Capacitors

Electrochemical Characterization of Mesopore Activated Carbon Electrodes for Electric Double-Layer Capacitors

Modification of the Activated Carbon Electrode Applied in Organic Electric Double-layer Capacitors