Abstract:It is demonstrated that cuprous oxide (Cu2O) can be electrodeposited epitaxially onto silicon (Si) and indium phosphide (InP) (001) single‐crystalline substrates from aqueous solution. Epitaxial electrodeposition under these conditions is remarkable considering the strong driving force for the formation of amorphous native oxide layers on Si and InP substrates. To elucidate the growth mechanisms, the microstructure of the interfaces between the Cu2O layer and the two different substrates was investigated by TEM (transmission electron microscopy) in conjunction with XEDS (X‐ray energy‐dispersive spectroscopy) and EELS (electron energy‐loss spectroscopy). In both heteroepitaxial systems, the Cu2O layers have a unique but non‐trivial crystallographic orientation relationship (OR) with the substrate, which can be described as a 45° rotation around the common [001] axis representing the substrate normal. We show that this relationship minimizes the overall misfit between corresponding interatomic spacings of the two adjacent crystals. In apparent contradiction to the unique OR, TEM revealed that in both hetero‐systems the Cu2O layer is separated from the substrate by an amorphous interlayer. The thickness of the interlayer typically is a few nanometers. The presence of an amorphous interlayer contrasts with our experimental results on electrodeposited Cu2O on Au (001) single‐crystal substrates, also included in this article, where TEM shows the Cu2O epilayer in direct contact with the substrate. XEDS and EELS analysis of the chemical composition and bonding at Cu2O/Si and Cu2O/InP interfaces in the as‐grown state as well as after tempering revealed that the interlayer is mainly composed of SiO2 and InPO4, respectively. Most likely, the observed epitaxial layers on top of an amorphous interlayer evolve by nucleation of epitaxial Cu2O directly on the substrate. While simultaneous oxidation of the substrate leads to the formation of an amorphous layer, the epitaxial nuclei can laterally overgrow the oxide. Consequently, the local composition of the amorphous layer varies with the nature of the substrate.

Interface-dominated growth of a metastable novel alloy phase

Dynamic Investigation of Cu50at%Au (001) Alloy Film Nano-oxidation by in Situ UHV TEM

EPITAXIAL GROWTH OF CUPROUS OXIDE ELECTRODEPOSITED ONTO SEMICONDUCTOR AND METAL SUBSTRATES

Structural evolution of Ag-Cu nano-alloys confined between AlN nano-layers upon fast heating

Interface-mediated Structural Evolution of Immiscible Co-Cu Multilayers Upon Solid-State Reaction

Interface Assisted Formation of a Metastable Hcp Phase by Ion Mixing in an Immiscible Ag-Ni System

Structural Phase Evolution in the Equilibrium Immiscible Co–Cu System Studied by Solid-State Reaction/Ion Beam Mixing of Nano-Sized Multilayers

Metastable Phases Induced by Ion Irradiation in the Equilibrium Immiscible Fe–Cu System

Interaction of size-selected Ag-clusters on Au-thin films: a composition study with in-situ XPS analysis at an elevated temperature

Metastable Alloy Formation in the Immiscible Cu–Ru System by Ion Beam Manipulation

Interface asymmetry and phase transformation of the Cu layer-inserted Al/Cu/Ni/Cu multilayers

Structural Transformation of Metastable Two-Electron Superatom Au-Doped Cu-Rich Alloy Nanocluster

Atomic Structure and Bonding of the Interfacial Bilayer Between Au Nanoparticles and Epitaxially Regrown Mgal2o4 Substrates

Manipulation of thin metal film morphology on weakly interacting substrates via selective deployment of alloying species

Microscopic modeling of the growth of order in an alloy: Nucleated and continuous ordering

Phase partitioning in a novel near equi-atomic AlCuFeMn alloy

The formation of heterointerface defects in Au/Cu films on Si substrates under direct current in a vacuum ultraviolet environment.

Surface Alloying Effects in the Growth of Au on Pb(111) Thin Film

Metastable Phase Formation in the FeCu System by Ion Irradiation and Solid State Interdiffusion

The Stability and Electronic Structure of Cu(200)/AuCu(200) Interface: An Insight from First-Principle Calculation

Interface-Driven Solid-State Alloying in an Immiscible Cu-W System