Abstract:The preparation of traditional organic-inorganic lead-halogen hybrid perovskite solar cells often requires strict nitrogen glove box conditions, hindering their industrial scalability. This study aimed to explore the development of a large-area perovskite film formation process and design a novel device structure to achieve a dual enhancement of module device efficiency and stability in a high humidity air environment (55%). High-quality perovskite thin films were successfully prepared by vacuum extraction in ambient air, followed by a double-end low-temperature photopolymerization process utilizing acrylate monomer molecules for inner encapsulation modification of the freshly formed perovskite thin films. The impact of these techniques on the photoelectric characteristics of perovskite thin films and devices was investigated. The results indicated that uniform and dense perovskite films could be achieved in ambient air with a pumping time of 60 seconds. By adjusting the concentration of ethylene glycol dimethacrylate monomer molecules used in the low-temperature photopolymerization process, surface defects on the perovskite film could be effectively controlled. The optimal concentration of 1 mg/ml resulted in perovskite films with optimal morphology and fluorescence intensity. Furthermore, rigid and flexible module devices (effective area: 18 cm2), based on the polymer inner encapsulation, demonstrated outstanding outdoor photoelectric conversion efficiencies of 19.51% and 18.17%, respectively (with the highest indoor low-light conversion efficiencies of 25.13% and 30.2%, respectively). Notably, the untreated flexible devices exhibited a significant decline in photoelectric conversion efficiency, falling below 50% of the initial value after one month of exposure to air. In contrast, devices incorporating the polymer inner encapsulation layer maintained over 90% of their original efficiency, highlighting their excellent humidity resistance stability. Moreover, the polymer encapsulation layer also greatly improved the bending stability of the flexible devices. This research paved avenue for the industrial-scale production of perovskite solar cells, addressing the challenges associated with humidity and large-area fabrication. The findings contribute to the advancement of perovskite solar cell technology, offering a pathway for high-efficiency and stable devices suitable for real-world applications.

Flexible Perovskite Solar Modules with Functional Layers Fully Vacuum Deposited

An efficient, flexible perovskite solar module exceeding 8% prepared with an ultrafast PbI2 deposition rate

Highest‐Efficiency Flexible Perovskite Solar Module by Interface Engineering for Efficient Charge‐Transfer

Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Creating a Dual‐Functional 2D Perovskite Layer at the Interface to Enhance the Performance of Flexible Perovskite Solar Cells

SnO2 Surface Modification and Perovskite Buried Interface Passivation by 2,5‐Furandicarboxylic Acid for Flexible Perovskite Solar Cells

Ef fi cient Mixed-Cation Mixed-Halide Perovskite Solar Cells by All-Vacuum Sequential Deposition Using Metal Oxide Electron Transport Layer

Scalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates

Highly Efficient Perovskite Solar Modules by Scalable Fabrication and Interconnection Optimization

Combined Vacuum Evaporation and Solution Process for High‐Efficiency Large‐Area Perovskite Solar Cells with Exceptional Reproducibility

Hybrid chemical vapor deposition enables scalable and stable Cs-FA mixed cation perovskite solar modules with a designated area of 91.8 cm2 approaching 10% efficiency

A novel 2D perovskite as surface "patches" for efficient flexible perovskite solar cells

Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility.

Low-Temperature Soft-Cover Deposition of Uniform Large-Scale Perovskite Films for High-Performance Solar Cells

Highly efficient flexible perovskite solar cells with vacuum-assisted low-temperature annealed SnO2 electron transport layer

Porous Lead Iodide Layer Promotes Organic Amine Salt Diffusion to Achieve High Performance p‐i‐n Flexible Perovskite Solar Cells

Surface Planarization‐Epitaxial Growth Enables Uniform 2D/3D Heterojunctions for Efficient and Stable Perovskite Solar Modules

In Air High-Efficiency and Stable Perovskite Solar Cells Module Assisted by Polymer Internal Encapsulation

Rational Interface Design and Morphology Control for Blade‐Coating Efficient Flexible Perovskite Solar Cells with a Record Fill Factor of 81%