Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

The Modification of Waste Polystyrene and Its Application as a Heavy Oil Flow Improver

Acetylation Modification of Waste Polystyrene and Its Use as a Crude Oil Flow Improver

Sustainable conversion of polystyrene waste into polymeric surfactants to be evaluated as pour point deperssants for waxy crude oil

Structural Modification of Waste Cooking Oil Methyl Esters As Cleaner Plasticizer to Substitute Toxic Dioctyl Phthalate

Peg-Modified Maleic Anhydride And Alpha-Olefin Copolymers And Their Effect On Flowability Of Crude Oils

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

Influences of the Molecular Weight and Its Distribution of Poly(Styrene-Alt-Octadecyl Maleimide) As A Flow Improver for Crude Oils

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Aminated Copolymers As Flow Improvers for Super-Viscous Crude Oils

Oil recovery from microwave co-pyrolysis of polystyrene and polypropylene plastic particles for pollution mitigation

High-Value Oil–Water Separation Materials Prepared from Waste Polyethylene Terephthalate

Experimental Investigation on Liquefaction of Plastic Waste to Oil in Supercritical Water.

Performance improvement on the cold flow properties of crude oil with high asphaltene by adjusting the polarity of the third monomer in polymers

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

Controlling the Wax Crystallization Behaviors Via the Ratio of Phenyl to Aliphatic Branches in Block Copolymer Synthesized by RAFT Copolymerization

Preparation and Performance Evaluation of a New Type of Polyethylene-vinyl Acetate/Polystyrene Microsphere Composite Pour Point Depressant for Waxy Crude Oil

Study on the Influence of the Imidization Degree of Poly(styrene-co-octadecyl Maleimide) As a Flow Improver in Waxy Crude Oils with Asphaltenes

Influence of polymers with surfactant properties as pour point depressants on the cold flow properties of diesel fuel

Effects of Molecular Structures of Poly(styrene- co -octadecyl maleimide) as a Flow Improver for the Model Crude Oil with a Relatively High Content of Asphaltenes

Preparation and mechanism of hyperbranched polymer as paraffin inhibitor and pour point depressant for high waxy crude oil

Study on Blending Modification of Waste Flame-Retardant HIPS Plastic