Abstract:<section class="article-section__content"><p>The poor compatibility and flame retardation of polylactide (PLA) and poly(butylene adipate<i>‐co‐ </i>terephthalate) (PBAT) blends seriously limit their applications. This study focused on the mechanical properties and flame retardancy of a PLA/PBAT blend under the influence of different levels of compatibilizer and multifunctional additives (MFA). PLA and PBAT were successfully compatibilized via reactive blending in a twin‐screw extruder. The flame retardation, flexibility, and impact toughness of the compatibilized blend were improved by the presence of tricresyl phosphate (TCP) and triethyl citrate (TEC). Separately and in combination, the two additives played crucial roles in flame retardant effectiveness, plasticization, and impact modification. The compatibilized blend displayed a UL‐94 V‐0 rating and exhibited a high limiting oxygen index (LOI). A slight reduction in thermal stability was exhibited when 20 phr TCP was incorporated into the blend. During combustion, an integrated char layer formed on the compatibilized blend surface and retarded flammability. The combination of TCP and TEC not only significantly improved dripping behavior and flame‐retardant properties of the compatibilized blend but also cooperatively enhanced the elongation at break and impact strength without impacting tensile strength, Young's modulus, LOI value, and thermal stability. The failure behavior of the blend changed from brittle to ductile, as evidenced by SEM, which revealed elongated fibrils after tension. These characteristics were associated with the presence of the MFAs and the improved interfacial adhesion between PLA and PBAT. As a result, flame retardation, flexibility, and impact resistance were enhanced. These improvements permit the wider application of PLA, especially in the electronic and automotive fields. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Highlights</h3><ul class="unordered-list"><li>Compatibilized PLA/PBAT blend achieved the V‐0 rating and had a high LOI.</li><li>Both TCP and TEC could be used as multifunctional additives (MFAs) in the compatibilized blend.</li><li>Combination of MFAs synergistically enhanced elongation at break and impact strength without impacting other properties of the blends.</li><li>These improvements permit the wider application of PLA, especially in the electronic and automotive fields.</li></ul></section>

Study on Blending Modification of Waste Flame-Retardant HIPS Plastic

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Preparation of new halogen free toughening flame retardant HIPS

Toughening and Strengthening Modification of Flame-Retardant High-Impact Polystyrene

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

A Study on Developing Fire Retardant HIPS Nano-composites

Building Blend from Recycling Acrylonitrile–butadiene–styrene and High Impact-Resistance Polystyrene Through Dextro-Glucose

Effects of Chlorinated Polyethylene and Antimony Trioxide on Recycled Polyvinyl Chloride/acryl-Butadiene-styrene Blends: Flame Retardancy and Mechanical Properties

Compatibilizing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high impact polystyrene blends via styrene-butadiene-glycidyl methacrylate terpolymer

Modification of ABS/PVC Blend

Multi-element Synergistic Effects to Improve the Flame Retardancy of High Impact Polystyrene

Reinforcing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high-impact polystyrene through ionic crosslinking

Mechanical, physical and thermal properties of waste polypropylene/polystyrene/natural rubber (wPP/PS/NR) blends

Study on the flame retardancy of high impact polystyrene composites filled with organic-modified carbon nanotubes

Development of a Zr-Based Metal-Organic Framework (UiO-66) for a Cooperative Flame Retardant in the PC/ABS

Influence of compatibilizer and multifunctional additive loadings on flame retardation, plasticization, and impact modification of polylactide and poly(butylene adipate‐co‐terephthalate) biodegradable blends

Studies on Fire Retarding Effect of Fire Retardant HIPS/Organo-MMT Nanocomposite--Synergistic Effect Between Conventional Additive and Organo-modified MMT

Toughening Modification of Poly(lactic acid) via Melt Blending

Effects of Melamine Cyanurate and Aluminum Hypophosphite on the Flame Retardancy of High-Impact Polystyrene