Abstract:Modern industry has become increasingly reliant on composite materials for a variety of applications, and the nuclear industry is no exception to this. Among the materials being researched as Enhanced Accident Tolerant Fuels, ceramic matrix composites such as SiC-fiber-reinforced SiC (SiCf/SiC) figure as some prime candidates due to their excellent high temperature performances. SiCf/SiC so far shows adequate nuclear, mechanical and chemical properties; still, the thermal properties need further investigation. The thermal behavior of a material is an important factor for its performance as a nuclear fuel cladding, i.e. the first barrier encapsulating the fuel pellets. Many features determine the resulting properties of composite materials, such as matrix and fiber reinforcement properties and orientation, void fraction, and pore morphology. This study establishes a methodology to study the physical properties of composite materials and applies it to SiCf/SiC. A FEM model is used to characterize the thermal properties of a fundamental SiCf/SiC element, referred to as a �unit cell�, with the objective of accurately predicting the thermal properties of this complex class of materials where experimental data is often difficult to obtain. The unit cell is built based on data acquired with high-resolution tomographic microscopy performed at the TOMCAT beamline of the Swiss Light Source. By using phase-retrieval prior to tomographic reconstruction, the pores, fibers and matrix that compose the material can be distinguished in the data analysis. The separated information is processed to obtain geometrical information about the individual pores and fibers, which is then used to parametrize them as cylindrical objects. This allows constructing a FEM model of a cubic unit cell that is used to extract the effective thermal properties of SiCf/SiC. The analysis scheme includes steady-state and dynamic thermal transport simulations, which yield directional effective thermal conductivity and diffusivity values, respectively. Both modes of analysis show isotropic thermal conductivity values in the range of 71 W/m/K at room temperature, more than three times that of currently employed nuclear cladding materials. Combining these results with the data on the larger structural features of the material will lead to realistic results on the macroscopic thermal properties.

Current status of SiC/SiC composites R&D

Current status and recent research achievements in SiC/SiC composites

Recent progress in the development of SiC composites for nuclear fusion applications

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

R&D OF SICF/SIC COMPOSITE FOR FUSION REACTOR MATERIAL

Fibre-reinforced multifunctional SiC matrix composite materials

Japanese activities of the R&D on silicon carbide composites in the broader approach period and beyond

Progress in research and development on matrix modification of continuous fiber-reinforced silicon carbide matrix composites

Comprehensive new insights on the potential use of SiC as plasma-facing materials in future fusion reactors

The response of silicon carbide composites to He ion implantation and ramifications for use as a fusion reactor structural material

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Processing and properties of nanophase SiC/Si3N4 composites

Progress in blanket designs using SiCf/SiC composites

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

FEM heat transfer modelling with tomography-based SiCf/SiC unit cell

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

Preceramic Paper-Derived SiCf/SiCp Composites Obtained by Spark Plasma Sintering: Processing, Microstructure and Mechanical Properties

Systematic study of preparation technology, microstructure characteristics and mechanical behaviors for SiC particle-reinforced metal matrix composites

Simultaneous Fine-Tuning of Hirshfeld Topological Surfaces, Volumes, and their Voids to Optimize the Radiation Shielding Properties: A Case Study of Silicon Carbide (SiC)

Rare earth monosilicates as oxidation resistant interphase for SiCf/SiC CMC: Investigation of SiCf/Yb2SiO5 model composites

Electron microscopy and microanalysis of the fiber-matrix interface in monolithic silicone carbide-based ceramic composite material for use in a fusion reactor application