Abstract:The long hydrophobic fatty acid chains of natural castor oil and low surface energy siloxane can form drainage structures that would displace water from the surface of the substrate to make PSA effectively contact with the substrate surface. Subsequently, some polar groups such as ester, urea, urethane and Si‐OH will form hydrogen bonds with the active groups on the surface of the substrate to achieve effective bonding on the wet substrate. Although waterborne polyurethane pressure‐sensitive (PSA) has achieved great progress, achieving robust effective adhesion on the wet substrate surface is still challenging. Herein, we developed a humidity‐insensitive waterborne polyurethane pressure‐sensitive adhesive through the modification of bio‐based castor oil and 3‐aminopropyl triethoxysilane (APTES) as the end‐capper. Improved bonding property on wet substrate via drainage of hydrophobic groups led to better humidity‐insensitive adhesiveness. The results exhibited exceptional bonding performance (∼3.3N/25 mm) on the moist surface of the steel in the environment with a humidity of 100 % RH (Relative Humidity). Especially, the 180° peel forces of siloxane‐terminated castor oil‐based waterborne polyurethane (SCWPU) respectively enhanced by 13.33 % and 73.68 % compared with the blank sample when the air humidity increased from 50 % RH to 100 % RH. Silicone had the advantages of low surface energy, good heat resistance and good oxidation resistance. The heat resistance could be improved by introducing silicone into waterborne polyurethane. Tested by the TGA, the SCWPU3 PSA demonstrated great thermal stability (THRI=144.32 °C). Besides, the PSA also exhibited low water absorption (20.6 %), and eligible viscoelasticity properties. These findings provided an impetus for the development of humidity‐insensitive PSA.

Synthesis and properties of silicone pressure sensitive adhesive

Surface Enrichment by Conventional and Polymerizable Sulfated Nonylphenol Ethoxylate Emulsifiers in Water-Based Pressure-Sensitive Adhesive

Synthesis of UV rapid curing silicone coatings via photoinitiated thiol-ene click polymerization for pressure-sensitive adhesive

UV-curable silicone pressure-sensitive adhesive based on thiol-ene reaction

Development of organic silicon pressure-sensitive adhesive

Silanization as a strategy to design polyurethane-acrylic hybrid pressure-sensitive adhesives

Repositionable Pressure-Sensitive Adhesive Possessing Thermal-Stimuli Switchable Transparency

Research Progress of Polyurethane Pressure-Sensitive Adhesive

Chlorosulfonated Poly(propylene Carbonate)-Based Pressure-Sensitive Adhesives with Improved Thermal Stability and Peel Strength

Incorporation of vinyl silane and epoxy silane oligomer into 2-EHA-based polyacrylate latexes via mini-emulsion polymerization and investigation of pressure-sensitive adhesive properties on polar and nonpolar surfaces

Adhesion improvement of the acrylic pressure-sensitive adhesive to low-surface-energy substrates using silicone urethane dimethacrylates

Self-Crosslinkable Pressure-Sensitive Adhesives from Silicone-(Meth)acrylate Telomer Syrups

Development of cardanol-derived epoxidized and Si-modified pressure-sensitive adhesives (PSAs)

The Effect of Pt-type Catalysts on Self-adhesive Properties of Silicone Pressure-sensitive Adhesives

Synthesis and Characterization of Pressure-Sensitive Adhesives Based on a Naphthyl Curing Agent

The synthesis, characterization and properties of silicone adhesion promoters for addition-cure silicone rubber

Synthesis of polyurethane acrylate and application to UV-curable pressure-sensitive adhesive

MoS₂ nanoplatelet fillers for enhancement of the properties of waterborne pressure-sensitive adhesives

A Humidity‐Insensitive Waterborne Polyurethane Pressure‐Sensitive Adhesive Modified by Castor Oil and Siloxane

Influence of Silicone Additives on the Properties of Pressure-Sensitive Adhesives

Synthesis of Polyurethane Acrylate and Application to Ultraviolet-Curable Pressure-Sensitive Adhesive