Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

Modelling of solid oxide fuel cells with internal glycerol steam reforming

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Glycerol-assisted co-electrolysis in solid oxide electrolyzer cell (SOEC) for green syngas production: A 2D modelling study

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Elementary reaction modeling and experimental characterization of solid oxide fuel-assisted steam electrolysis cells

Multi-physics field modeling of biomass gasification syngas fueled solid oxide fuel cell

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Elementary reaction kinetic model of an anode-supported solid oxide fuel cell fueled with syngas

2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Experimental and Modeling Study of High Performance Direct Carbon Solid Oxide Fuel Cell with in Situ Catalytic Steam-Carbon Gasification Reaction

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells

Coupled Electrochemical-Thermo-Stress Analysis for Methanol-Fueled Solid Oxide Fuel Cells

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Numerical simulation of carbon deposition in solid oxide fuel cells

Experimental Characterization and Elementary Reaction Modeling of Solid Oxide Electrolyte Direct Carbon Fuel Cell

Direct liquid methanol-fueled solid oxide fuel cell

Evaluating the influence of working parameters on the efficiency of a solid oxide fuel cell by conducting sensitivity analysis using electrochemical and thermodynamic modeling

Modeling of Direct Carbon Solid Oxide Fuel Cells with H2o and Co2 As Gasification Agents

Mathematical modeling of solid oxide fuel cells at high fuel utilization based on diffusion equivalent circuit model

The Performance of Solid Oxide Fuel Cells Based on Methanol Solution