Abstract:Abstract Masonry is one of the most common building materials, which is used due to low cost, good sound and heat insulation properties, easy availability and locally available material [1]. Masonry walls are consisted of bricks and mortar which interconnect regularly, the bricks are jointed together by the mortar through various conventional patterns. Since its extensive application it would certainly be subjected to a variety of strikes from human activities such as wars and military conflicts apart from erosion of natural forces wind, rain and so on. The knowledge of masonry will be useful if on urban battlefield because of the inability of conventional forces to manoeuvre troops and vehicles with ease. Many reviewer hold that urban warfare is on the increase, with recent events in Iraq, Libya and Syria indicating that the battleground is shifting inexorably to large and small conurbations. Thus it is necessary to work out how to operate in the future urban environment and maximise our capabilities at a time of diminishing military strength [2]. As pointed out by C. S. Meyer, the U.S. Army’s concern in urban operations has brought about efforts at the U.S. Army Research Laboratory to develop an initial set of material model parameters to enable physics-based penetration simulations of high-fidelity brick and mortar masonry wall models. A search of publicly released literature turned up not much concerning modeling and simulation of weapon effects against brick and mortar targets. The characteristic of concrete under dynamics load has been studied in detail however the investigation of dynamic material properties of brick and mortar is in early stages [3]. What has been historically employed to investigate the dynamic characteristic of concrete includes theoretical method, experimental method and the numerical simulation. It has been shown that numerical stimulation is a cost-effective method and can provide more information of process history for sophisticated analysis than experimental method. Nevertheless, the data from experiments were crucial because on the one hand any modern analysis and stimulation computation should necessarily be validated by those come from real range tests, on the other hand the material parameters which are of vital importance to obtain a reasonable and compelling result must be furnished by or refer to experimental data [4]. The experimental exploration indicates that brick and mortar joint act similarly as concrete. Many material models are proposed to describe the behaviour of concrete, which are able to apply to solution of simulating behaviour of masonry reasonably. Li et al. [5] investigated the response mode of masonry subjected to vented gas explosion through experiment and simulation, in which the anisotropic material model *MAT_96 (MAT_BRITTLE_DAMAGE) has been adopted. The material model has been developed by Govindjee et al. [6]. Meyer explored profoundly the potential of the HJC model to apply in simulation of penetrations, which was initialled by Holmquist and Johnson in 1993 [3].

Numerical derivation of homogenised constitutional relation of mortar-less interlocking brick wall for dynamic response prediction

Simplified homogenization technique for nonlinear finite element analysis of in-plane loaded masonry walls

Numerical Simulation of Masonry Walls Subjected to Blast Loads

A machine learning based material homogenization technique for in-plane loaded masonry walls

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Simulating the damage of rubble stone masonry walls using FDEM with a detailed micro-modelling approach

Numerical Study on Cracking Process of Masonry Structure

Prediction of Brickwork Failure Using Discrete-Element Method

Numerical Simulation of the Failure Process of Unreinforced Masonry Walls Due to Concentrated Static and Dynamic Loading

A block-based numerical strategy for modeling the dynamic out-of-plane behavior of unreinforced brick masonry walls

A robust computational strategy for failure prediction of masonry structures using an improved multi‐surface damage‐plastic based interface model

Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application

Dynamic response of reinforced masonry structure under blast load

Numerical Analysis of Civil House Wall under Gas Explosion Load

Analytical modeling of masonry load-bearing walls

Experimental and numerical investigation on penetration of clay masonry by small high-speed projectile

Damage Analysis of 3D Masonry Structures under Explosion Shock Waves Based on the CDEM

Dynamic Response and Damage Analysis of Steel Box Wall under Internal Blast Loading

3D hybrid modelling approach combining the finite and discrete element methods: Validation based on masonry shear wall tests

Numerical Simulation And Its Experimental Test On Cracking Process Of Masonry Structures

EFFECTS OF CONCRETE MASONRY WALLS ON STRUCTURES UNDER NUCLEAR BLAST LOADINGS