Abstract:Samples, Testing and Results. The current study presents an experimental investigation devoted to the nano‐silica and cutout effects on the axial and lateral buckling responses of carbon/epoxy fiber‐reinforced composite laminates. To this end, specimens manufactured by vacuum bagging after hand layup technique were prepared at various amounts of nano‐silica (0.5%, 1.0%, 1.5%, 2.0%, and 3.0% by weight) incorporated into epoxy resin. Furthermore, semi‐circular and circular cutouts were opened on specimens to understand cutout effect on buckling characteristics of specimens. The results demonstrated that nano‐silica had a significant effect on buckling behaviors of the carbon fiber‐reinforced composites. Regardless of cutout presences, maximum critical axial (393.33 N, 361.67 N, 320 N for W, C and S) and lateral buckling loads (34.67 N, 33 N, 32.33 N for W, C and S), were achieved from the samples having 1.5 wt. % nano‐silica. In specimens having no cutout, maximum improvements of 72.26% in axial and 48.6% in lateral directions were achieved from the specimens having 1.5 wt. % nano‐silica content. A further amount of nano‐silica addition decreased the resistance to buckling of the specimens. Also, the presence of cutouts on the specimens led to decreases in critical loads. The decreases of 1.5 wt. % nano‐silica doped specimens without cutout in the axial and lateral critical buckling loads, respectively, were seen as 22.9% and 7.24% for circular cutout, 8.75% and 5.06% for semi‐circular cutout. It was concluded that cutout processing and nano‐silica additions should be taken into consideration in a material that may be exposed the buckling failures. Highlights Nano‐silica impact on buckling behaviors of carbon fiber‐reinforced composites Cutout effects on buckling properties of carbon fiber‐reinforced composites Failure modes of carbon fiber‐reinforced composites with nano‐silica particles Findings showed that 1.5 wt. % nano‐silica inclusion exhibited the best values for buckling.

Effectiveness of double cutout on lateral buckling analysis of fiber reinforced composites

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Failure Behavior and Strength of Composite I-Section Beam with Double Cutouts and Stiffener Reinforcement

The Bearing Behavior and Failure Characteristic of Cfrp Laminate with Cutout under Shearing Load: Part I. Experiments

Postbuckling Strengths of Composite Laminates with a Central Circular/Elliptical Cutout Under In-Plane Combined Loads

Effects of circular cutouts on mechanical behaviors of carbon fiber reinforced lattice-core sandwich cylinder

Buckling Predication of Laminated Composite with Elliptical Hole under Shearing Loads by Simulation

Experimental Study on Composite Laminate with a Large Elliptical Cutout under Shear Load

EXPERIMENTAL AND ANALYTICAL EVALUATION OF LATERAL BUCKLING OF FRP COMPOSITE CANTILEVER I-BEAMS

Buckling characteristics of nano‐silica doped carbon fiber reinforced composites having cutouts

STRENGTH ANALYSIS OF FIBER REINFORCED COMPOSITE LAMINATES WITH BIG CUTOUTS 1)

Post-buckling Progressive Damage of CFRP Laminates with a Large-Sized Elliptical Cutout Subjected to Shear Loading

The Bearing Behavior and Failure Characteristic of CFRP Laminate with Cutout under Shearing Load: Part II. Numerical Simulations

Experimental and simulation study of the effect of cut-out defect in carbon fibres twill weave composite

Effect of Fiber Path on the Buckling Behavior of Delaminated Composites Reinforced with Woven Fabrics; Analytical and Numerical Study

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Effects of openings on postbuckling behavior of large‐size composite C‐beam under bending‐shear coupling load

Flexural-Torsional Buckling of Pultruded Fiber Reinforced Plastic Composite I-Beams: Experimental and Analytical Evaluations

Analysis of the Effect of an Open Hole on the Buckling of a Compressed Composite Plate

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Investigation on strength loss in buckling of composite columns subjected to fatigue loading