Abstract:Rod fastening rotor (RFR), as a typical rotor structure of gas turbine which is different from the integral rotor, is comprised of a set of discs clamped together by a central tie rod or several tie rods on the pitch circle diameters. In process of machining, tolerances of the disc are inevitable, of which the parallelism error and mass imbalance are focused on in this paper. Firstly, the complex bending of RFR by accumulation of parallelism errors of discs is derived through the coordinate transmission. Then the static analysis of RFR is performed to obtain the additional pressure by the effect of unbalanced forces, which is related to the assembly angles and rotating speed, on contact surfaces using a linear hypothesis, based on which the distribution of contact pressure considering the original pre-tightening force is obtained. Then the Bifractal-Regular theory is adopted to acquire the micro-topography of the contact interface and derive the contact stiffness related to normal contact pressure, fractal upper length limit and regular shape of the contact interfaces. After that, the zero thickness element is introduced to obtain the equivalent stiffness matrices of the contact surface. In addition, the circumferential uniformly distributed rods are modeled as a spring element which provides additional bending stiffness for the RFR. Based on the analysis above, the dynamic model of the RFR-bearing system containing 10 discs is established using the Timoshenko beam element where the continuous part of the shaft is modeled by Timoshenko beam element considering shear effect. Finally, the multi -optimization is carried out on the vibration response by the coupled effects of both initial bending and mass imbalance of the RFR-bearing system through which the optimal assembly angles are obtained. The results show a good performance in decreasing vibration as well as bending of the RFR system.

A dynamic approach for evaluating the moment rigidity and rotation precision of a bearing-planetary frame rotor system used in RV reducer

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

A New Dynamic Model of Ball-Bearing Rotor Systems Based on Rigid Body Element

Dynamic Modeling and Analysis of an RV Reducer Considering Tooth Profile Modifications and Errors

A General Method for the Dynamic Modeling of Ball Bearing–Rotor Systems

Dynamic modeling and vibration analysis of an RV reducer with defective needle roller bearings

An analytical modelling approach for overall torsional stiffness of rotate vector reducer

Nonlinear Dynamic Modeling of Rotor System Supported by Angular Contact Ball Bearings

Study on Nonlinear Dynamic Characteristics of RV Reducer Transmission System

A reliability evaluation method for RV reducer by combining multi-fidelity model and Bayesian updating technology

A New Nonlinear Dynamic Model of the Rotor-Bearing System Considering Preload and Varying Contact Angle of the Bearing

A General Dynamic Model Coupled with EFEM and DBM of Rolling Bearing-Rotor System

Tribological analysis of rotor system startup considering deformations of high elastic rubber bushings and grease lubricated plastic bearings

A new method for calculating time‐varying torsional stiffness of RV reducers with variable loads and tooth modifications

Dynamic modeling and simulation of a flexible-rotor ball bearing system

Analysis and experimental study on vibration characteristics of the RV reducer

A Study on Torsional Stiffness of RV Reducer Considering Variable Loads and Tooth Modification

Optimization Design of RV Reducer Crankshaft Bearing

Dynamic Analysis And Optimization On Assembly Parameters Of Rod Fastening Rotor System With Manufacturing Tolerances

Study on the Dynamic Response of an Unbalanced Rotor System Supported by Ball Bearings

A Real-Time Coupling Model of Bearing-Rotor System Based on Semi-Flexible Body Element