Abstract:To eliminate the shortcomings in the grouting sleeve and other connection forms in precast concrete shear wall structure induced by the poor grouting, difficult quality assurance, low construction efficiency, and high cost, a new type of monolithic assembled concrete shear wall structure with non-connected vertical distributed reinforcement was proposed in this paper. The new shear wall structure is composed of middle precast wall panels and cast-in-place boundary members. The vertical distributed reinforcement in the middle precast wall panels is not connected between the upper and lower floors. This technique was based on the normal section bearing capacity of equal strength and inclined section bearing capacity of equal strength compared with the cast-in-place shear wall structure. Three full-scale models of precast shear walls and one cast-in-place contrast specimen were tested for their seismic performance under pseudo-static loading. All precast specimens are cast based on the manufacture specification of the factory. By analysis of test results, including the failure modes, load-lateral drift hysteresis curves, bearing capacity, hysteretic characteristics, deformation components, ductility, rigidity degeneration, energy dissipation, and strain distribution, all the specimens were obtained and compared. Comparisons between test results indicate that the proposed shear walls have a similar bearing capacity as that of the cast-in-place shear wall and improved energy dissipation and ductility. Moreover, the specimen with inclined reinforcement performs better in drift capacity compared to companion specimens. The contribution of flexural deformation to the total displacement of each specimen is the largest, follow by the contribution of shear deformation, and the contribution of slip is the smallest. The strain of non-connected vertical distributed reinforcement of the precast panel did not yield during the loading process. The cross-section of the precast shear wall panel conforms to the assumption of plane cross-section according to the strain distribution before the reinforcement yields.

Study on Seismic Damage Performance of Aeolian Sand Concrete Shear Walls with Hidden Bracings

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Study on seismic performance of the CFST-framed aeolian sand concrete composite shear wall

Experimental study on the seismic performance of short shear walls comprising cold-formed steel and high-strength reinforced concrete with concealed bracing

Subassemblage Tests on Seismic Behavior of Double-Corrugated-plate Shear Walls

Seismic performance of L-shaped short-leg shear walls with different concealed support materials

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Seismic performance of innovative prefabricated reinforced recycled concrete shear walls

Seismic Behaviors of Prefabricated Reinforced Concrete Shear Walls Assembled with a Cast-in-Place Vertical Joint

Optimizing seismic performance in RC short‐leg shear walls: Numerical simulations of concealed bracing configurations and materials

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall

Experimental study on seismic behaviors of the welded L-shaped double steel plate-concrete composite shear wall

Seismic performance and flexible connection optimization of prefabricated integrated short-leg shear wall filled with ceramsite concrete

Cyclic Shear Behavior of Composite Walls with Encased Steel Braces

Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement

Quasi-static Test and Simplified Analysis Method of a New Type Precast Shear Wall with Unconnected Vertical Distributed Reinforcements

An exhaustive research and analysis on seismic performance of prefabricated concrete shear wall structure

Seismic behavior of reinforced concrete shear walls subjected to high axial loading

Experimental study on seismic performance of new-type fabricated shear wall with mortar connection