Abstract:<p>This paper proposes a steel frame assembled with a concrete-filled steel tubular (CFST)-bordered composite wall structure. The composite wall was fabricated as an assembled seismic member to improve the seismic performance of the steel frame. Therefore, on the basis of a full-sized bare steel frame as a contrast specimen, four full-sized steel frames assembled with CFST-bordered composite wall specimens were designed. The differences among these four specimens include the use of inclined braces in the CFST-bordered composite walls and the different designs of the inclined braces, and these differences are to investigate the influence of the inclined braces on the proposed structures. Low cyclic loading was applied to the specimens, and the seismic behavior of each specimen was analyzed. The experimental results indicated that the seismic performance of the bare frame was greatly enhanced by the assembled CFST-bordered composite wall. The setting of the rebar braces or the CFST braces can significantly increase the yield load, peak load, and dissipation energy capacity, and the inverted V-shaped braces are efficient. The rebar braces can also delay concrete cracking and release strength degeneration. As the first line of defense, the damage of the CFST-bordered composite wall occurs earlier than that of the steel frame, and the damage of the steel frame is slight when the CFST-bordered composite wall is broken. The steel frame can still work as the second line of defense to prevent the collapse of the structure. Furthermore, calculation methods were proposed for determining the bearing capacities of the bare steel frame and the CFST-bordered composite wall based on the failure modes identified during testing and finite element analysis. The calculated results were in good agreement with the test results.</p>

Study on seismic performance of the CFST-framed aeolian sand concrete composite shear wall

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Concrete-Filled Multicellular Steel-Tube Shear Walls with FRP Tubes Embedded in CFST: Concept and Seismic Performance

Study on Seismic Damage Performance of Aeolian Sand Concrete Shear Walls with Hidden Bracings

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Seismic experiments and shear resistance prediction of multi‐celled corrugated‐plate CFST walls

Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Seismic Performance of Composite Shear Walls with Embedded FCCCs in Boundary Elements

Seismic Behavior of Cfst-Enhanced Steel Plate-Reinforced Concrete Shear Walls

Experimental and numerical studies of prefabricated structures using CFST frame and composite wall

Experimental Study on Seismic Performance of Composite Shear Wall with Horizontal Connection and Frame

Seismic Performance Study on a Precast Double-Skin Composite Wall with Circular CFSTs

Seismic performance of a steel frame assembled with a CFST-bordered composite wall structure

Experimental study on seismic behaviors of the welded L-shaped double steel plate-concrete composite shear wall

Seismic behavior of composite frame infilled composite steel plate shear walls

Seismic Behaviour of Circular CFST Columns and RC Shear Wall Mixed Structures : Experiments