Abstract:Ternary alloys of Ge-Sb-Te (GST) have been extensively studied due to their unique ability display a reversible change in their phase upon stimulation by optical pulses i.e., amorphous (a-GST) to crystalline (c-GST) and vice-versa. The two phases exhibit remarkably different electrical and optical properties like conductivity, reflectivity, refractive index and optical loss, this coupled with their high phase switching speeds, low power phase switching, large measurable optical and electrical contrast, and phase stability makes GST alloys stand out from other phase change materials (PCM). GST alloys have already found extensive use in optical disks and electronic memories due to their non-volatility and zero static power consumption, but the precise mechanism of the phase change is not clearly understood. The phase change mechanism has usually been attributed to the optical pulse, usually a high power short pulse laser, heating up the c-GST alloy to above its melting temperature (Tm) after which, if it is cooled rapidly enough to below the glass transition temperature (Tg), the atoms are fixed in place due to the drastic reduction in their mobility, resulting in a phase which exhibits structure similar to a frozen liquid and lacks long range order i.e. amorphous. When heated above Tg with an intermediate power laser pulse for a significant amount of time, then this favors the shift back to the energetically favorable crystalline phase. With the growing interest in next generation data storage technology for photonic and neuromorphic computing, the research into understanding and improving the properties of GST alloys has also been rekindled. In this term paper we hope to investigate and gain a deeper understanding and appreciation of the kinetics and underlying atomistic mechanism of this phase transition from c-GST to a-GST and vice-versa which is only now becoming clearer.

Tunable colorimetric thin-film structures based on phase change materials

Phase-change behavior of RuSbTe thin film for photonic applications with amplitude-only modulation

Optical constants acquisition and phase change properties of Ge2Sb2Te5 thin films based on spectroscopy

A phase-change thin film-tuned photonic crystal device

Phase change of Ge 2 Sb 2 Te 5 under terahertz laser illumination

Extreme Broadband Transparent Optical Phase Change Materials for High-Performance Nonvolatile Photonics

Non‐Volatile Reconfigurable Integrated Photonics Enabled by Broadband Low‐Loss Phase Change Material

A Review of Germanium-Antimony-Telluride Phase Change Materials for Non-Volatile Memories and Optical Modulators

Multi-level Optical Switching by Amorphization in Single- and Multi- Phase Change Material Structures

Tunable Metasurfaces Based on Phase-Change Materials

Magnetron-sputtered and Thermal-Evaporated Low-Loss Sb-Se Phase-Change Films in Non-Volatile Integrated Photonics

Application of phase change material in tunable optical filters and shutters

Electrically Controlled 1 × 2 Tunable Switch Using a Phase Change Material Embedded Silicon Microring.

Advanced Phase-Change Materials for Enhanced Meta-Displays

Reversible single-pulse laser-induced phase change of Sb$_2$S$_3$ thin films: multi-physics modeling and experimental demonstrations

All‐Optical Switching of Structural Color with a Fabry–Pérot Cavity

Outstanding phase-change behaviors of GaGeSbTe material for phase-change memory application

Combining Switchable Phase‐Change Materials and Phase‐Transition Materials for Thermally Regulated Smart Mid‐Infrared Modulators

An Investigation into the Kinetics and Mechanism of Phase Transitions in Optical Phase Change Ternary Alloy $Ge_2Sb_2Te_5$

Solution-derived Ge-Sb-Se-Te phase-change chalcogenide films

Unraveling the optical contrast in Sb2Te and AgInSbTe phase-change materials