Abstract:Lithium–sulfur batteries (LSBs) are expected to be one of the most promising next-generation energy storage systems due to their high energy density and theoretical specific capacity. However, the poor electrical conductivity, significant volume expansion during discharging, and "shuttle effect" of lithium polysulfides (LiPSs) have seriously impeded the further development of LSBs. Herein, inspired by the "lotus blooming" procedure, a 3D composite host material made up of cobalt nanocrystals/carbon nanosheets/carbon nanotubes (Co/CNS/CNT) is synthesized by in situ growth of CNTs to exfoliate off ultrathin CNSs from 0D precursors in a one-step method. As expected, the 3D structure of Co/CNS/CNT provides horizontal and vertical transmission channels for electrons/ions and is conducive to the uniform loading of sulfur and infiltration of the electrolyte. Furthermore, the Co/CNS/CNT host material realizes the synergistic effect of physical and chemical adsorption/catalysis through its 3D structure and fine Co nanocrystals. The Co/CNS/CNT-S cathode shows excellent cycle performance (after 500 cycles at a current density of 1C, the remaining capacity is 660.6 mAh g–1, and the capacity decay rate per cycle is only 0.06%). This work achieves the transformation of 0D precursors into a 3D framework through a facile strategy, which has great application potential in LSBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02162.Experimental section; TEM images of PAA-NH4 NSs; the pore size distribution of the Co/CNS/CNT; TGA curve of (A) CNS/CNT-S and (B) CNS-S under a N2 atmosphere from room temperature to 700 °C; TEM images of (A) CNS/CNT and (C) CNS; SEM images of (B) CNS/CNT and (D) CNS; Co/CNS/CNT, CNS/CNT, and CNS adsorption capacity test in 5 mL of a mixed solution of DME/DOL and 2 mM Li2S6; galvanostatic discharge–charge profiles of the (A) CNS/CNT-S and (B) CNS-S cathodes at different rates from 0.1 to 2.0C; SEM images and separator photos from the disassembled Li–S cell after 200 cycles at 1C with different cathodes: (A) Co/CNS/CNT-S, (B) CNS/CNT-S, and (C) CNS-S; and performance comparison of the Co/CNS/CNT-S with other composite host materials containing element Co (PDF)This article has not yet been cited by other publications.

In situ composition of Thienothiophene-based covalent organic framework on carbon nanotube as a host for high performance Li-S batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium-Sulfur Batteries.

Three-Dimensional Covalent Organic Framework Serving As Host and Electrocatalyst in the Cathode of Li-S Battery

Self-Templated Formation of Carbon Nanotubes Interpenetrating Ordered Microporous Carbon Nanospheres for High-Performance Li–S Batteries

Entrapment and Reactivation of Polysulfides in Conductive Amphiphilic Covalent Organic Frameworks Enabling Superior Capacity and Stability of Lithium-Sulfur Batteries

New Covalent Triazine Framework Rich in Nitrogen and Oxygen As a Host Material for Lithium-Sulfur Batteries

Two-dimensional organic-inorganic heterostructures of in situ-grown layered COF on Ti3C2 MXene nanosheets for lithium-sulfur batteries

Silanol–branched covalent organic framework host structure for boosting sulfur electrochemistry of Li–S batteries

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

B,N Codoped Graphitic Nanotubes Loaded with Co Nanoparticles As Superior Sulfur Host for Advanced Li-S Batteries.

TiN@C Nanocages As Multifunctional Sulfur Hosts for Superior Lithium-Sulfur Batteries.

Hydroxylated Multi-walled Carbon Nanotubes Covalently Modified with Tris(hydroxypropyl) Phosphine as a Functional Interlayer for Advanced Lithium-Sulfur Batteries.

Facile “Lotus Blooming” Strategy to Synthesize a 3D Carbon Nanosheet/Carbon Nanotube Framework with Embedded Co Nanocrystals for High-Performance Lithium–Sulfur Batteries

Controlled Construction of Cobalt-Doped Carbon Nanofiber-Carbon Nanotubes as a Freestanding Interlayer for Advanced Lithium-Sulfur Batteries

Boosting Polysulfide Catalytic Conversion and Facilitating Li+ Transportation by Ion‐Selective COFs Composite Nanowire for LiS Batteries

A new defect-rich and ultrathin ZnCo layered double hydroxide/carbon nanotubes architecture to facilitate catalytic conversion of polysulfides for high-performance Li-S batteries

A Dual‐Functional Conductive Framework Embedded with TiN‐VN Heterostructures for Highly Efficient Polysulfide and Lithium Regulation toward Stable Li–S Full Batteries

Nitrogen and oxygen co-doped porous biocarbon@sulfur/carbon nanotubes as cathodes for high-performance lithium-sulfur batteries

Synthesis of CoO Nanocrystals Decorated Porous Carbon Nanotube Microspheres As Sulfur Host for High Performance Li/S Batteries.