Abstract:Lithium-sulfur (Li-S) batteries are a promising candidate for next-generation energy storage owing to the high theoretical capacity of sulfur (1,675 mAh g −1 ). However, the intrinsically low electrical conductivity of sulfur and complex multistep electrolyte-mediated redox reactions involving soluble lithium polysulfide intermediates engender critical challenges toward practical realization. Specifically, migration and diffusion of higher-order lithium polysulfides provokes continuous loss of active sulfur species, yielding premature capacity fade. Electrochemical kinetics also remain sluggish due to the insulating nature of sulfur cathodes, which require engineering designs to accelerate charge transfer. Rational morphological and compositional cathode tuning represents a compelling strategy for addressing fundamental Li-S limitations. Herein, we develop an extended cathode architecture composed of a porous carbon nanotube network decorated with homogenously dispersed nanocatalysts. Electron microscopy and spectroscopy analysis verify platinum group metals are well-incorporated both within internal channels and external surface sites of conductive carbon nanotubes. The composite framework affords multifaceted functionality arising from synergistic chemical and structural attributes of components. Nanocatalyst sites demonstrate a pronounced chemical affinity toward soluble polysulfide intermediates, effectively localizing them within cathode, minimizing diffusional losses toward the anode. This anchoring phenomenon is complemented by the inherent microporosity of the high-surface-area nanotube network, further obstructing polysulfide migration through a confinement effects. Concurrently, noble metal nanoparticles facilitate the redox conversion of trapped higher-order polysulfides into solid Li 2 S alleviating the precipitation of electrically insulating discharge products. The excellent electrical conductivity of CNTs ensures efficient charge transport to all incorporated sulfur active materials, further maximizing reversible utilization. As a result of complementary polysulfide confinement and electrocatalytic conversion functionalities, Li-S coin cells exhibit enhanced reversible capacities exceeding 900 mAh g −1 for over 500 cycles at 0.558 A g −1 . Notably, over 500 cycles, minimal capacity decay of 0.018% per cycle and 92% retention of the initial capacity are obtained at moderate sulfur loadings highlighting the exceptional cycling stability enabled by engineered cathodes. Outstanding rate performance is also demonstrated with the delivery of 854 mAh g −1 capacity at a very high current density of 1.675 A g −1 . Our rationally designed cathode architecture provides critical mechanistic insight toward addressing fundamental bottlenecks to progress Li-S technologies.

Synergistic Effect of CNT-TiO 2 Catalyst and 3D Electrode Architecture for Electrochemical Performance in Lithium-Sulfur Batteries

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Synergistic effect of 3D-electrode architecture and FeS 2 decorated graphene sheet as a catalytic cathode in lithium-sulfur battery

Synergistic Electrocatalyst-Cathode Architecture for Stable Long-Term Cycling Lithium-Sulfur Batteries

Synergistic Design of g-C3N4-Supported CNTs: Experimental and DFT Insights for Enhanced Electrochemical Performance in Flexible Li-S Batteries

Investigating the Electrocatalysis of Ti3C2/Carbon Hybrid in Polysulfide Conversion of Lithium-Sulfur Batteries.

CNTs@S Composite As Cathode for All-Solid-state Lithium-Sulfur Batteries with Ultralong Cycle Life

Durable Lithium–Sulfur Batteries Based on a Composite Carbon Nanotube Cathode

A Synergistic Strategy with 3D Highly Conductive Carbon Matrix‐Decorated with Low Loading of CdS Quantum Dots as a Sulfur Host for Advanced Li−S Batteries

Three-Dimensional Carbon-Catalyst As Sulfur Host for Polysulfide Regulation in Lithium-Sulfur Batteries

Sulfur/carbon cathode material chemistry and morphology optimisation for lithium-sulfur batteries

Synergistic effect of Li2S@Li3PS4 nanosheets and MXene for high performance lithium-sulfur batteries

Facile “Lotus Blooming” Strategy to Synthesize a 3D Carbon Nanosheet/Carbon Nanotube Framework with Embedded Co Nanocrystals for High-Performance Lithium–Sulfur Batteries

Three-dimensional Twisted Fiber Composite As High-Loading Cathode Support for Lithium Sulfur Batteries

Macro/Mesoporous Carbon/Defective TiO 2 Composite as a Functional Host for Lithium–Sulfur Batteries

3D Tungsten Disulfide/Carbon Nanotube Networks as Separator Coatings and Cathode Additives for Stable and Fast Lithium–Sulfur Batteries

Tailoring 3D Carbon Foam using CNTs and MnO 2 to Fabricate Stable Lithium/Dissolved Lithium Polysulfide Batteries

Constructing carbon nanotube-optimized hollow Ti3C2 MXene hierarchical conductive networks for robust lithium-sulfur batteries

A Multi-Layered Ti3C2/Li2S Composite As Cathode Material for Advanced Lithium-Sulfur Batteries

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries