Catalytic combustion of CVOCs over Cr Ti1- oxide catalysts

Wei Sun,Binwei Gong,Jun Pan,Yangyang Wang,Hangqi Xia,Hao Zhang,Qiguang Dai,Li Wang,Xingyi Wang

DOI: https://doi.org/10.1016/j.jcat.2020.08.007

IF: 7.3

2020-11-01

Journal of Catalysis

Abstract:Cr x Ti1- x oxide catalysts prepared by a sol–gel process were investigated in catalytic combustion of 1,2-dichloroethane, vinyl chloride, chlorobenzene, 1,2-dichlorobenzene, and trichloroethylene. FT-IR spectra on Cr0.1Ti0.9 showed that 1,2-dichloroethane, vinyl chloride, and chlorobenzene adsorbed through the hydrogen bond between TiOH and Cl atoms and then interacted with surface Cr6+=O in Cr2O7 2− species to form a reactive enolic species, which was further oxidized with surface oxygen. The activity was greatly dependent on Cr6+ as both a strong Lewis acid and reducible sites. TOFCr 6+ at 200 °C was 0.59–1.12 × 10−3 s−1. Chlorination products were not observed with the conversion approaching completion below 300 °C. The activity on a stream feed containing 1000 ppm reactants at 245 and 285 °C was maintained for at least 100 h. The formation of Cr-O-Ti effectively inhibited the escape of Cr as Cl2CrO2. It was confirmed by physically closed contact of Cr2O3 and TiO2 that a synergism between Cr6+ and Ti-OH was responsible for the high activity and stability of Cr x Ti1- x catalysts.

chemistry, physical,engineering, chemical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient catalytic combustion catalyst for the treatment of chlorinated volatile organic compounds (CVOCs). Specifically, the research focuses on the effective removal of chlorinated volatile organic substances such as 1,2 - dichloroethane, vinyl chloride, chlorobenzene, 1,2 - dichlorobenzene and trichloroethylene at lower temperatures by Cr_xTi_\(1 - x\) oxide catalysts. The following are the key issues mentioned in the paper:

1. **Enhancing catalytic activity**: Although traditional precious - metal catalysts have high activity, they are sensitive to Cl poisoning and are prone to loss and sintering. Transition - metal oxides or rare - earth oxides (such as Ce, Co, Mn, Cr and Sn - based oxides) have a relatively high ability to resist Cl adsorption, but their activity is relatively low. This study aims to enhance the catalytic combustion activity through Cr_xTi_\(1 - x\) oxide catalysts.

2. **Reducing the reaction temperature**: In order to achieve efficient and low - energy - consumption treatment of CVOCs, it is necessary to develop catalysts that can work at lower temperatures. Research shows that Cr_xTi_\(1 - x\) catalysts exhibit good catalytic performance at low temperatures, especially in the range of 200 - 300°C.

3. **Inhibiting by - product formation**: In the catalytic combustion process of CVOCs, harmful by - products such as polychlorinated dibenzo - p - dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) may be generated. In this study, by optimizing the catalyst composition and structure, complete conversion of CVOCs at lower temperatures is ensured without generating these harmful by - products.

4. **Enhancing catalyst stability**: The long - term stability and anti - deactivation ability of the catalyst are key factors in industrial applications. It has been found that the Cr_xTi_\(1 - x\) catalyst can still maintain a relatively high catalytic activity after continuous operation for 100 hours, indicating that it has good stability.

5. **Understanding the reaction mechanism**: Through various characterization methods (such as FT - IR, XPS, TPSR, etc.), the adsorption and oxidation mechanisms of CVOCs on Cr_xTi_\(1 - x\) catalysts have been thoroughly explored. It has been found that the effective extraction of Cl atoms, the existence of surface Cr\(^{6+}\) species and the synergistic effect of Ti - OH groups are the key factors for achieving efficient catalytic combustion.

In summary, the main objective of this paper is to develop an efficient, stable Cr_xTi_\(1 - x\) oxide catalyst that can work at lower temperatures, so as to achieve effective treatment of chlorinated volatile organic compounds and reduce the generation of harmful by - products.