Abstract:The reactivity of isobutane dehydrogenation over a series of non-ordered mesoporous chromia/alumina (Cr2O3/Al2O3) catalysts with large specific surface area (149.4–381.6m2g−1) and high pore volume (0.77–1.24cm3g−1), synthesized using a metal-organic framework MIL-101 as a molecular host and chromium precursor, aluminium isopropoxide (Al(i-OC3H7)3) as the aluminium precursor, were studied in detail. The chromium species were highly dispersed over the catalyst with chromia loading up to 10wt.%. The specific surface area of the catalyst decreased, whereas the amount of surface Cr3+ species and the mole ratio of Cr3+ and Cr6+ species (Cr3+/Cr6+) increased with the increasing chromia loadings (5–25wt.%) and calcination temperature (500–900°C), respectively. The addition of potassium to the catalyst system greatly promoted isobutene selectivity and catalyst stability. The catalyst with 1.5wt.% K2O and 10wt.% Cr2O3 loadings calcined at 800°C was found to exhibit the highest isobutane conversion 60.1% with the isobutene selectivity up to 93.2% among all the catalysts. The maintainable catalytic reactivity demonstrated the high stability of the catalyst in ten dehydrogenation-regeneration cycles. Moreover, it was proposed that the Cr3+ species was mainly the active site and catalytic selectivity was depended on the surface Cr3+/Cr6+ value over the catalyst. The catalyst presented much more stable dehydrogenation activity compared with the conventional catalyst. Consequently, this study presents a feasible way to facile synthesis of the mesoporous MOF-derived Cr2O3/Al2O3 catalysts with high stability and good catalytic reactivity over isobutane dehydrogenation.

Boosting Chlorobenzene Oxidation over MIL-101(Cr) Derived CrOx Catalysts: the Stepwise Regulation of CrOx Clusters and Oxygen Species by Calcination Atmospheres

Highly Catalytic Performance for the Selective C-H Bond Oxidation of P-Chlorotoluene over Co, Cr Co-Doped OMS-2 Catalyst

Praseodymium-Doped Cr2O3 Prepared by In Situ Pyrolysis of MIL-101(Cr) for Highly Efficient Catalytic Oxidation of 1,2-Dichloroethane

Mofs-derived CuCeOx Supported on H-zeolite Socony Mobile-5 for Catalytic Oxidation of 1,2-Dichlorobenzene

Catalytic Oxidation of Chlorobenzene over Ce-Mn-Ox/TiO2: Performance Study of the Porous Structure

Catalytic oxidation of toluene by binary metal oxide Cr2O3/CeO2 from MIL-101 (Cr)

Catalytic Oxidation of 1,2-Dichlorobenzene over Coxcry Oxides

Catalytic Combustion of CVOCs over CrxTi1-x Oxide Catalysts

Isobutane Dehydrogenation over the Mesoporous Cr2O3/Al2O3 Catalysts Synthesized from a Metal-Organic Framework MIL-101

Highly Active and Durable Chlorobenzene Oxidation Catalyst via Porous Atomic Layer Coating of Ru on Pt/Al 2 O 3

Catalytic Oxidation of Chlorobenzene over Amorphous Manganese-Chromium Catalysts Supported by UiO-66-Derived ZrOx

Improved activity and stability for chlorobenzene oxidation over ternary Cu-Mn-O-Ce solid solution supported on cordierite

Highly Active Behaviors of CeO2–CrOx Mixed Oxide Catalysts in Deep Oxidation of 1,2-Dichloroethane

The catalytic combustion of VOCs over copper catalysts supported on cerium-modified and zirconium-pillared montmorillonite

Catalytic Oxidation of Chlorobenzene over MnxCe1-xO2/HZSM-5 Catalysts: A Study with Practical Implications.

CaO-Promoted Lattice Oxygen Activation and Antichlorine Poisoning over Mullite for Catalytic Chlorobenzene Combustion

Comparative Investigation On Chlorobenzene Oxidation By Oxygen And Ozone Over A Mnox/Al(2)O(3 )Catalyst In The Presence Of So2

Low temperature catalytic combustion of chlorobenzene over cobalt based mixed oxides derived from layered double hydroxides

Crystal-Facet Modulated CrOx/γ-Al2O3: Quasi-Liquid Surface Modification by Bonded Polydimethylsiloxane for Catalytic Oxidation of Propene

Highly active and durable chlorobenzene oxidation catalyst via porous atomic layer coating of Ru on Pt/Al2O3

Elucidating the nature role of acid etching on the CoMnO x catalyst with outstanding performance for the catalytic combustion of o-dichlorobenzene