Abstract:In recent years, humanity has experienced the effects of using unsustainable energy sources that pollute the environment while being inefficient. Most of the primary energy input used in energy conversion processes is lost in the form of heat. Thermoelectric generators (TEGs) have the potential to recover some of this wasted heat; however, their low energy conversion efficiency needs to be addressed. Previous literature has shown effective optimization of thermoelectric generation systems through statistical tools such as the Taguchi method that optimized all the parameters that affect the outcome of the system. To this date, no research has considered wind speed for convection heat transfer as one of the optimizable parameters. This study aims to optimize the operating conditions of commercially available TEGs that are cooled by forced convection simulating naturally occurring wind speeds and operate under low-quality waste heat temperatures to improve the TEG performance further. Two commercially available TEGs are optimized via the Taguchi method. The Taguchi method is implemented with three parameters and three levels, making an L 9 orthogonal array. The objective function is the maximum output power. The optimized parameters are the hot side temperature, the heat sink size, and the wind airspeed. Analysis of variance (ANOVA) is used alongside the Taguchi orthogonal array for the statistical analysis of the results. The optimization results show that the hot side temperature is the most influential parameter to the output power. In addition, the change in the heat sink size also significantly influences the output power, whereas the impact of the wind speed is not as significant. In addition, interaction analysis between the parameters is performed. The Taguchi method yields satisfactory optimization results. The optimized system yields 0.65 W of power at 140 °C hot side temperature, Model K402 heat sink, and 3.7 m·s −1 wind speed. The influence of the air velocity of 1.73% is minimal on the output power compared to the hot side temperature, with a level of influence of 75.67% and a heat sink size of 22.43% for the shorter module. The results also show that the TEG with a smaller TE leg height yields the best output power at low load resistance ranging from 0.2 Ω to 2 Ω, as the TEG with a taller TE leg renders better performance at higher load resistance ranging from 3 Ω to 16 Ω at the optimal conditions. The results show that the hot side temperature remains the most important parameter in the optimization process. Furthermore, convection cooling from naturally occurring winds has a minimal but positive effect on the output of the presented TEG system.

Transient real-weather 4E optimization of two-stage segmented thermoelectric generators for enhanced solar energy conversion

Geometry and stage number optimization of a concentrating solar multistage segmented thermoelectric generator by exploiting different optimization schemes

Thermodynamic Modelling and Real-Time Control Strategies of Solar Micro Gas Turbine System with Thermochemical Energy Storage

Advantage of a Thermoelectric Generator with Hybridization of Segmented Materials and Irregularly Variable Cross-Section Design

Optimal Design and Multi-Parameter Sensitivity Analysis of a Segmented Thermoelectric Generator

A Novel Optimization Method for TEG System Performance Based on Temperature and Heat Flux

Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization

Boosting Thermoelectric Generator (TEG) Performance with Tandem Radiative/Evaporative/Phase Change Cooler

Parametric analysis and potential evaluation of thermoelectric generator driven by solar energy and radiative sky cooling

Enhancing the performance of thermoelectric generators using novel segmental arrangement of multi-functional gradient materials

Parametric study and design optimization of a thermoelectric generator system for waste heat recovery

Model development and preliminary study of the concentrated-radiative cooling based thermoelectric generator

Evaluation of Energy Recovery Potential of Solar Thermoelectric Generators Using a Three-Dimensional Transient Numerical Model

Maximum Efficient Power Performance Analysis and Multi-Objective Optimization of Two-Stage Thermoelectric Generators

High-performance Terrestrial Solar Thermoelectric Generators Without Optical Concentration for Residential and Commercial Rooftops

Optimization of a unileg thermoelectric generator by the combination of Taguchi method and evolutionary neural network for green power generation

Performance Analysis and Optimization of Concentrating Solar Thermoelectric Generator

Preliminary Experiment and Performance Evaluation of a Terrestrial Solar Thermoelectric Generators under Fluctuant Solar Radiation

Modeling and optimization of radiative cooling based thermoelectric generators

Geometrical Optimization of Segmented Thermoelectric Generators (TEGs) Based on Neural Network and Multi-Objective Genetic Algorithm

Taguchi optimization and analysis of variance for thermoelectric generators with forced convection air cooling