CPFD numerical study on tri-combustion characteristics of coal, biomass and oil sludge in a circulating fluidized bed boiler

Xiaole Huang,Xiaoling Jin,Lingxiao Dong,Ruiyu Li,Kaixuan Yang,Yuhang Li,Lei Deng,Defu Che

DOI: https://doi.org/10.1016/j.joei.2024.101550

IF: 6.47

2024-02-05

Journal of the Energy Institute

Abstract:To study the tri-combustion characteristics of coal, biomass, and oil sludge, the computational particle fluid dynamics (CPFD) method is employed to simulate the flow, heat transfer, and combustion processes in a 130 t h −1 circulating fluidized bed (CFB) boiler. The effects of blending ratio, secondary air inlet angle, and excess air coefficient are evaluated in detail. The results show that the mole fraction of SO 2 in the furnace is slightly lower than that in the cyclone separator. NO x has high mole fraction near the fuel inlet. As the biomass blending ratio rises from 30 % to 50 %, the O 2 mole fraction at the furnace outlet increases from 0.0601 to 0.0629, while CO 2 exhibits the opposite tendency. The highest and lowest NO x mole fractions at the furnace outlet are 4.1648 × 10 −5 and 3.9862 × 10 −5 , respectively. As the blending ratio of oil sludge rises from 10 % to 20 %, the mole fraction of SO 2 at the furnace outlet increases from 3.3041 × 10 −4 to 4.8952 × 10 −4 . The mole fraction of NO x in the furnace shows a positive correlation with the excess air coefficient, while SO 2 is on the contrary. As the jet angle increases from 15° to 30°, the NO x mole fraction at the furnace outlet decreases from 4.1696 × 10 −5 to 3.9862 × 10 −5 .

energy & fuels