Abstract:The assembled hollow-core slab bridge is the most widely used beam bridge in China. With the increasing traffic volume and traffic load in China, the joints of the hollow-core slab bridge are prone to damage. In this paper, a hollow-core slab bridge with locally curved prestressed tendons is proposed. Based on the static load test of a beam with joints taken from the cross section of a hollow-core slab bridge in practical engineering, a finite element nonlinear analysis is used to simulate the test, and the concrete and interface parameters under the correct analysis results are obtained. Finally, the parameters are applied to the three-beam and two-joint hollow-core slab bridge with a span of 10 m and a finite element analysis is carried out to explore the total failure process and performance improvement effect of the prestressed hollow-core slab bridge. The results show that the interface unit method can successfully simulate the new-to-old concrete interface where the joint is in contact with the precast beam segment. Compared with the static load test results, the analysis error of each finite element model is basically within 15%. Compared with the traditional hollow-core slab bridge, the cracking load, through-joint load, and ultimate load of the prestressed hollow-core slab bridge are increased by 50.0%, 91.7%, and 66.7%, respectively. Under the same load, the stress of the U-bar, the relative deflection of both sides of the joint, and the maximum width of the joint of the prestressed hollow-core slab bridge are lower than those of the traditional hollow-core slab bridge. When the ultimate load is reached, the longitudinal crack lengths of the traditional hollow-core slab bridge and the prestressed hollow-core slab bridge are 0.48 L and 0.4 L, respectively, and the damage degree of the prestressed hollow-core slab bridge is lower than that of the traditional hollow-core slab bridge.

Design method of transverse prestress inflicted on the simply-supported hollow slab bridge

The anti-arch inhibition effect of multispan continuous girder bridge strengthened with prestressed CFRP plates

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Calculating Method and Experimental Research on Lateral Load Distribution of Transversely Strengthened Hollow Slab Bridge

Strengthening Experiment of a Hollow Slab Bridge by External Transverse Prestressing

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Study on Method of Simulating Spatial Effect of Prestressing Force in Bridge

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Calculation of Long-Term Slippage for Externally Prestressing Steel-Concrete Composite Beam

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Research on Rational Post Successive Prestress Tension Sequence of Simply Supported and Continuous Box Girder Bridge

Study on Load Transfer Mechanism of Local Curved Prestressed Hollow-Core Slab Bridge

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

Analysis of Prestressed Concrete Bridge with Virtual Laminated Element Method