Abstract:Dielectric medium (kerosene) between the tool electrode and workpiece forms a reaction product, owing to thermal effect of discharge in the process of electrical discharge machining (EDM), which is emitted from the surface in the form of harmful gas and may get into the operator’s body by breath system inhalation and contact with skin. Therefore, exhaust emissions should be considered as important performance indicators for the green machining in the process of EDM. Moreover, energy efficiency and machining productivity should be improved and the cut process must take ecological constraints into consideration. Thereafter, the definition of green manufacturing helps to evaluate different and sometimes conflicting aspects of the manufacturing process, such as machining productivity, surface quality, energy efficiency and exhaust emissions. But it is difficult to dynamically adjust the weights of different aspects according to the actual processing conditions. This paper proposes a framework for optimization of cutting parameters to minimize energy consumption and exhaust emissions during electrical discharge machining of Al 6061 and SKD 11. Three cutting process parameters (peak current, pulse period, and duty cycle) are tested against material remove rate (MRR), surface roughness (Ra), energy efficiency per volume (EEV), and exhaust emissions characteristics (EEC) for EDM of these two materials. First, the process energy and exhaust emissions are analyzed. The results show that EEV is negatively correlated with surface quality (Ra) for both Al 6061 and SKD 11 material. Second, two data analyses (Taguchi and adaptive-network-based fuzzy inference system (ANFIS) analyses) are utilized to obtain high MRR and best Ra, EEV and EEC for the desired machining performances and environmental sustainability. It is found that the relative errors between the predicted values and experimental results of MRR, Ra, EEV and EEC are all not more than 20%, and found that the maximum of mean relative errors of them is 13.04%. Finally, a framework implemented by an optimization system, based on ANFIS, enhanced cuckoo search (ECS) algorithm and desirability function, is built to obtain the desired cutting parameters. It is found that high peak current (8.94A) and pulse period (500 μ s ) are recommended to obtain multi-objective optimization for machining Al 6061, and that the optimal solutions of the EEV and EEC are significantly decreased, by 87.13% and 37.09%, respectively. Similarly, high peak current (8.77A) and pulse period (261.5 μ s ) are recommended to obtain multi-objective optimization for machining SKD 11, and the optimal solutions of the EEV and EEC are significantly decreased, by 93.73% and 46.85%, respectively. Thereafter, it can be concluded from the above research that the proposed technique offers significant advantages and potential for applications in the green manufacturing field.

Reducing the environmental impact of semiconductor manufacture

EUV lithography vacuum system energy and footprint reduction

Innovative Approaches for RG 3D NAND CMP Buff Steps Elimination with Fab Cost and Carbon Footprint Reduction : GF: Green Factory

Achievement of Green and Sustainable CVD Through Process, Equipment and Systematic Optimization in Semiconductor Fabrication

Reduction of Greenhouse Gas Emissions by Metal Interconnect Etch Process Optimization

Global virtual factory simulation for energy efficiency

Improving the Environmental Performance of in Situ PECVD Chamber Cleaning Processes by Studies of CVD Reactor Clean Performance and Field Evaluation of Optimised Processes

Processes for environmentally friendly and/or cost-effective manufacturing

Sustainability of Additive Manufacturing: an Overview on Its Energy Demand and Environmental Impact

Industrial Internet of Things Enabled Supply-Side Energy Modelling for Refined Energy Management in Aluminium Extrusions Manufacturing

Assessment of sustainable and machinable performance metrics of monocrystalline silicon carbide wafer with electrophoretic-assisted multi-diamond wire sawing

Circular water strategies in solar cells manufacturing

A Lean & Green Model for a production cell

Using intelligent technology and real-time feedback algorithm to improve manufacturing process in IoT semiconductor industry

Advancements in greenhouse gas emission reduction methodology for fluorinated compounds and N2O in the semiconductor industry via abatement systems

Green machining: A framework for optimization of cutting parameters to minimize energy consumption and exhaust emissions during electrical discharge machining of Al 6061 and SKD 11

ECO-CHIP: Estimation of Carbon Footprint of Chiplet-based Architectures for Sustainable VLSI

A decision-making model for comparing the energy demand of additive-subtractive hybrid manufacturing and conventional subtractive manufacturing based on life cycle method

Environmental data and facts in the semiconductor manufacturing industry: An unexpected high water and energy consumption situation

Modeling and Assessment of Carbon Emissions in Additive-Subtractive Integrated Hybrid Manufacturing Based on Energy and Material Analysis

A LCA and LCC analysis of pure subtractive manufacturing, wire arc additive manufacturing, and selective laser melting approaches