Shape-Programmable Three-Dimensional Microfluidic Structures

Zizheng Wang,Hao Jiang,Guangfu Wu,Yi Li,Teng Zhang,Yi Zhang,Xueju Wang

DOI: https://doi.org/10.1021/acsami.1c24799

2022-03-23

Abstract:Microfluidic devices are gaining extensive interest due to their potential applications in wide-ranging areas, including lab-on-a-chip devices, fluid delivery, and artificial vascular networks. Most current microfluidic devices are in a planar design with fixed configurations once formed, which limits their applications such as in engineered vascular networks in biology and programmable drug delivery systems. Here, shape-programmable three-dimensional (3D) microfluidic structures, which are assembled from a bilayer of channel-embedded polydimethylsiloxane (PDMS) and shape-memory polymers (SMPs) via compressive buckling, are reported. 3D microfluidics in diverse geometries including those in open-mesh configurations are presented. In addition, they can be programmed into temporary shapes and recover their original shape under thermal stimuli due to the shape memory effect of the SMP component, with fluid flow in the microfluidic channels well maintained in both deformed and recovered shapes. Furthermore, the shape-fixing effect of SMPs enables freestanding open-mesh 3D microfluidic structures without the need for a substrate to maintain the 3D shape as used in previous studies. By adding magnetic particles into the PDMS layer, magnetically responsive 3D microfluidic structures are enabled to achieve fast, remote programming of the structures via a portable magnet. A 3D design phase diagram is constructed to show the effects of the magnetic PDMS/SMP thickness ratio and the volume fraction of magnetic particles on the shape programmability of the 3D microfluidic structures. The developed shape-programmable, open-mesh 3D microfluidic structures offer many opportunities for applications including tissue engineering, drug delivery, and many others.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24799.Illustration of the dimensions of 3D microfluidic structures attached to a substrate and in their freestanding state; images of the cross section of a buckled 3D structure before and after programming; experimental and simulation results of the free end angle of an SMP/mPDMS ribbon structure that is programmed under magnetic forces, as a function of the volume fraction of magnetic particles in mPDMS; optical images of deformed SMP/mPDMS ribbon structures corresponding to points (1–10) denoted in the 3D design phase diagram; and effect of the SMP/mPDMS thickness ratio and the volume fraction of magnetic particles on the mechanically programmed deformation of 3D SMP/mPDMS microfluidic "table" structures. (PDF)Deformation of a SMP/mPDMS cantilever beam structure (Vm = 17.5%, tsmp/tmPDMS = 0.857) via magnetic forces when being heated above 37 °C (MP4)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology