Abstract:Shape memory polymers (SMPs) and shape memory nanocomposites (SMNCs) are capable of recovering their original shapes from temporary shapes when they are triggered by heat, water, PH value, electrical and magnetic fields, etc [1, 2]. Such unique features enable SMPs and SMNCs extremely suitable for application as shape-changing structures in the areas varing from aerospace to biomedicine [3, 4]. However, conventional processing methods limit the design space of such smart structures [5]. It severely restricts the further developments of SMPs and SMNCs in advanced technologies, such as 4D printing, flexible electronics, and soft robotics, etc. 3D printing technique may be one of the best choices to overcome this challenge. This advanced processing approach can produce materials into custom-defined and complex geometries [6, 7]. By combination of 3D printing technique, some 4D structures based on SMPs have been developed. Their potential applications in flexible electronics and sequential self-folding structures have also been demonstrated [8-10]. However, the printing materials focus on pure SMPs. Meanwhile, the actuation methods of those 4D structures are mainly based on heat. It is not really useful in practical applications. SMNCs with iron oxide (Fe3O4) has much merit, since Fe3O4 could be used as inner heating source in the presence of alternating magnetic fields to achieve remote actuation [11, 12]. However, most of the commercially available 3D printers are designed to print specific or pure polymers. It is still hard to achieve the printing of SMNCs. Direct-write assembly is an open printing method that can be adjusted for processing various materials [13, 14]. In this study, we achieved 4D printing of both SMPs and SMNCs by combination of direct-write assembly with UV Light-emitting diodes (LED). The printing material was based on Poly(lactic acid) (PLA), because it was widely used in not only 3D printing area but also shape memory field. Benzophenone (BP) was chosen as cross-linking agent for excellent shape memory properties. Fe3O4 was used as functional nanofillers to trigger the remotely actuated shape-changing behavior. Dichloromethane (DCM) was utilized as solvent for its low boiling point. 2. RESULTS AND DISCUSSIONS

4D Printing Of Shape Memory Epoxy For Adaptive Dynamic Components

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Digital Laser Direct Writing of Internal Stress in Shape Memory Polymer for Anticounterfeiting and 4D Printing.

Exploring the Adaptability of 4D Printed Shape Memory Polymer Featuring Dynamic Covalent Bonds

Thermal-, Magnetic-, and Light-Responsive 4d Printed SMP Composites with Multiple Shape Memory Effects and Their Promising Applications

Reconfigurable 4D printing via mechanically robust covalent adaptable network shape memory polymer

4D Printing of a Fully Biobased Shape Memory Copolyester via a UV-Assisted FDM Strategy

4D Printing of Shape Memory Polymer Nanocomposites for Enhanced Performances and Tunable Response Behavior

4D Printing of Shape Memory Polymers: Research Status and Application Prospects

4D Printing of shape-memory polymeric scaffolds for adaptive biomedical implantation

Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite.

Direct-write fabrication of 4D active shape-changing behavior based on a shape memory polymer and its nanocomposite (Conference Presentation)

Dynamically Customizable 4D Printed Shape Memory Polymer Biomedical Devices: a Review

4D Printing of Multiple Shape Memory Polymer and Nanocomposites with Biocompatible, Programmable and Selectively Actuated Properties

Digital light processing 4D printing multilayer polymers with tunable mechanical properties and shape memory behavior

Tunable deformation behavior of 4D printed shape memory polymers with embedded pre-stretched elastomers

4D Printing of Shape Memory Aliphatic Copolyester Via UV-assisted FDM Strategy for Medical Protective Devices

Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing

Near-infrared Light-Driven Programmable Shape Memory Polymer for Self-Shaping 3D Printing Methods

4 d printing of poly ( lactic acid )-based shape memory polymers and shape memory nanocomposites

Self-Healing Four-Dimensional Printing with an Ultraviolet Curable Double-Network Shape Memory Polymer System