Abstract:In this research, the nanoparticles (NPs) of magnesium alloy (Mg–Al-Zn) were prepared using a laser ablation technique in a solution and then deposited on porous silicon. The structural characterization, electrical, and spectral properties of the nanoparticles deposited on the porous silicon were investigated. Firstly, the initial alloy was made as a bulk nanostructured alloy using high-pressure torsion processing at a grain size of 100 nm and then subjected to laser ablation at different powers of 500, 600, 700, 800, and 900 mJ, to produce metallic nanoparticles at a minimum particle size of 5.6 nm. Secondly, metallic nanoparticles were deposited on the porous silicon. Porous silicon (PS) was fabricated by photo-electrochemical etching (PECE) on an n-type crystalline silicon (c-Si) wafer with (111) orientation An etching current density of 20 mA/cm 2 was applied for 15 min in an etchant medium of a 20% concentration of HF in the aforementioned etching process. The resultant particles were analyzed using the X-ray diffraction (XRD) technique, scanning electron microscopy (SEM), and UV–visible spectrophotometry, as well as the electrical properties and photodetection studies were achieved here. The XRD data indicated the presence of Mg–Al-Zn NPs with a hexagonal wurtzite structure at a distinct diffraction peak at 28.5°. The morphological characteristics of Mg–Al-Zn nanoparticles deposited on the porous silicon indicated that the nanoparticle layer predominantly comprises particles with various shapes and sizes, randomly distributed on the porous silicon, with a relatively large particle size of an average of 24.15 nm when using a laser power of 500 mJ in the ablation process. The optical characteristics of the synthesized nanoparticles showed a rise in the value of the band gap with the augmentation of wavelength. Current–voltage ( I-V ) characterization showed there was an ohmic contact between deposited samples and electrodes. The photo-detector investigation yielded spectrum responsivity curves with three distinct zones. The initial region in the curve is ascribed to the assimilation of ultraviolet (UV) radiation by the Mg–Al-Zn NPs. The second region was attributed to the absorption of visible light by the PS layer, whereas the third peak resulted from the edge absorption of the Si substrate. The Mg–Al-Zn NPs/PS photodetector demonstrated a responsivity of 0.41 A/W when using a laser intensity of 900 mJ. The findings of this work open the way for future investigations to utilize such complex metallic systems as in Mg–Al-Zn NPs in photodetectors and optoelectronic devices utilizing complex metallic systems with advanced properties.

Au@Pb Core@Shell Nanoparticles Produced by Magnetic Field–assisted Two-step Laser Ablation in the Direction of a Highly Efficient Porous Silicon–based Heterojunction Photodetector

Two-Step Laser Ablation for the Synthesis of Au:Pb Core/Shell NPs for a High-Performance Silicon-Based Heterojunction Photodetector

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors.

Synthesis of Au@NiO (Core@Shell) Nanoparticles via Laser Ablation on Silicon Nanostructures for Photodetector Application

A novel laser-assisted approach for synthesis of AuNPs/PS nanostructures as photodetector

Synthesis of Mg–Al-Zn Alloy Nanoparticles Via Laser Ablation and Deposited on Porous Silicon for Enhancement in the Spectral Responsivity

Preparation of Bismuth Oxide Nanoplatelets/Si Photodetector by Laser Ablation in Liquid Under Effect of an External Magnetic Field

Broadband (Ultraviolet to Near-Infrared) Photodetector Fabricated in n-ZnO/p-Si Nanowires Core–Shell Arrays with Ligand-Free Plasmonic Au Nanoparticles

MoS 2 Nanoflake and ZnO Quantum Dot Blended Active Layers on AuPd Nanoparticles for UV Photodetectors

Synergetic Enhancement of CsPbI3 Nanorods-based High-Performance Photodetectors via PbSe Quantum Dot Interface Engineering

Plasmon-enhanced self-powered GaN/ZnTe core/shell nanopillar array photodetector

Development of ZnO and Si Semiconductor-Based Ultraviolet Photodetectors Enhanced by Laser-Ablated Silver Nanoparticles

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

Simultaneous visible and ultraviolet photoresponse improvement of MoS2/ZnO heterostructure photodetector via direct resonant coupling of Au nanoparticles localized surface plasmon resonance

Ag@WO3 core–shell nanocomposite for wide range photo detection

Facile and Eco-Friendly Fabrication Route of In2O3NP/MWCNTs Heterostructure as High-Performance Photodetectors by Laser Ablation Method

Microstrain Effects of Laser-Ablated Au Nanoparticles in Enhancing CZTS-based 1 Sun Photodetector Device

Ag nanoparticles at p-Si/ MAPbI3 perovskite interface: improved photo responsivity and response speed in photodetection

Simple Preparations for Plasmon-Enhanced Photodetectors

Superior visible photoelectric response with Au/Cu2NiSnS4 core-shell nanocrystals

Hybrid Bulk‐Heterojunction of Colloidal Quantum Dots and Mixed‐Halide Perovskite Nanocrystals for High‐Performance Self‐Powered Broadband Photodetectors