Abstract:In this research, the nanoparticles (NPs) of magnesium alloy (Mg–Al-Zn) were prepared using a laser ablation technique in a solution and then deposited on porous silicon. The structural characterization, electrical, and spectral properties of the nanoparticles deposited on the porous silicon were investigated. Firstly, the initial alloy was made as a bulk nanostructured alloy using high-pressure torsion processing at a grain size of 100 nm and then subjected to laser ablation at different powers of 500, 600, 700, 800, and 900 mJ, to produce metallic nanoparticles at a minimum particle size of 5.6 nm. Secondly, metallic nanoparticles were deposited on the porous silicon. Porous silicon (PS) was fabricated by photo-electrochemical etching (PECE) on an n-type crystalline silicon (c-Si) wafer with (111) orientation An etching current density of 20 mA/cm 2 was applied for 15 min in an etchant medium of a 20% concentration of HF in the aforementioned etching process. The resultant particles were analyzed using the X-ray diffraction (XRD) technique, scanning electron microscopy (SEM), and UV–visible spectrophotometry, as well as the electrical properties and photodetection studies were achieved here. The XRD data indicated the presence of Mg–Al-Zn NPs with a hexagonal wurtzite structure at a distinct diffraction peak at 28.5°. The morphological characteristics of Mg–Al-Zn nanoparticles deposited on the porous silicon indicated that the nanoparticle layer predominantly comprises particles with various shapes and sizes, randomly distributed on the porous silicon, with a relatively large particle size of an average of 24.15 nm when using a laser power of 500 mJ in the ablation process. The optical characteristics of the synthesized nanoparticles showed a rise in the value of the band gap with the augmentation of wavelength. Current–voltage ( I-V ) characterization showed there was an ohmic contact between deposited samples and electrodes. The photo-detector investigation yielded spectrum responsivity curves with three distinct zones. The initial region in the curve is ascribed to the assimilation of ultraviolet (UV) radiation by the Mg–Al-Zn NPs. The second region was attributed to the absorption of visible light by the PS layer, whereas the third peak resulted from the edge absorption of the Si substrate. The Mg–Al-Zn NPs/PS photodetector demonstrated a responsivity of 0.41 A/W when using a laser intensity of 900 mJ. The findings of this work open the way for future investigations to utilize such complex metallic systems as in Mg–Al-Zn NPs in photodetectors and optoelectronic devices utilizing complex metallic systems with advanced properties.

A novel laser-assisted approach for synthesis of AuNPs/PS nanostructures as photodetector

Synthesis of Au@NiO (Core@Shell) Nanoparticles via Laser Ablation on Silicon Nanostructures for Photodetector Application

Au@Pb Core@Shell Nanoparticles Produced by Magnetic Field–assisted Two-step Laser Ablation in the Direction of a Highly Efficient Porous Silicon–based Heterojunction Photodetector

Two-Step Laser Ablation for the Synthesis of Au:Pb Core/Shell NPs for a High-Performance Silicon-Based Heterojunction Photodetector

Synthesis and Characterization of Al2O3 Nanoparticles Using PLAL With Different Nd:YAG Laser Fluences for Photodetectors

Broadband (Ultraviolet to Near-Infrared) Photodetector Fabricated in n-ZnO/p-Si Nanowires Core–Shell Arrays with Ligand-Free Plasmonic Au Nanoparticles

Simple Preparations for Plasmon-Enhanced Photodetectors

Development of ZnO and Si Semiconductor-Based Ultraviolet Photodetectors Enhanced by Laser-Ablated Silver Nanoparticles

Plasma parameters of Au nano-particles ablated on porous silicon produced via Nd-YAG laser at 355 nm for sensing NH3 gas

Enhancing photodetection performance through laser fluence control: SnO 2 nanostructured deposited on porous silicon

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

Realization of a high-Responsivity ultraviolet sensor base on ZnO nanowires modified by Au nanoparticles

Self-powered photodetector for ultralow power density UV sensing

Enhanced Performance of a Self‐Powered ZnO Photodetector by Coupling LSPR‐Inspired Pyro‐Phototronic Effect and Piezo‐Phototronic Effect

Microstrain Effects of Laser-Ablated Au Nanoparticles in Enhancing CZTS-based 1 Sun Photodetector Device

Plasmon‐Induced Pyro‐Phototronic Effect Enhancement in Self‐Powered UV–Vis Detection with a ZnO/CuO p–n Junction Device

Facile Fabrication of Ultrasensitive Honeycomb Nano-Mesh Ultraviolet Photodetectors Based on Self-Assembled Plasmonic Architectures

High-responsivity hybrid α-Ag2S/Si photodetector prepared by pulsed laser ablation in liquid

Dual-plasmonic Au/graphene/Au-enhanced Ultrafast, Broadband, Self-Driven Silicon Schottky Photodetector

Synthesis of Mg–Al-Zn Alloy Nanoparticles Via Laser Ablation and Deposited on Porous Silicon for Enhancement in the Spectral Responsivity

Improved Photoresponse of UV Photodetectors by the Incorporation of Plasmonic Nanoparticles on GaN Through the Resonant Coupling of Localized Surface Plasmon Resonance