Abstract:This article presents a sustainable method for the catalytic reduction of both simple and binary dye systems using magnetic activated carbon (Fe 3 O 4 @AC) synthesized from almond shells, an agricultural waste biomass. The reduction of methylene blue (MB) and Congo red (CR) was investigated in the presence of NaBH 4 , and a series of physical-chemical experiments were conducted to elucidate the mechanism of dye conversion and its performance. The results confirmed the successful synthesis of Fe 3 O 4 nanoparticles on the activated carbon surface. The calculated rate constants in a simple system were 0.34 min− 1 for MB and 0.25 min− 1 for CR, in the binary system, the Fe 3 O 4 @AC catalyst demonstrated enhanced selectivity for the cationic MB dye, attributable to the robust, attractive surface charge. The study aimed to enhance catalytic performance by employing optimization curves generated from a three-level Box-Behnken Design (BBD) simulation. Experimental results indicated that the optimal catalyst dose, dye concentration, and reaction duration were 4–7 mg, 80–120 mg/L, and 5–20 min, respectively. Response surface methodology (RSM) was developed by processing the findings from 17 replicated experiments using a two-quadratic polynomial model, establishing a functional link between the experimental parameters and MB conversion. Optimal conditions for MB conversion were determined to be 7 mg of catalyst, 80 mg/L of MB concentration, and a reaction time of 12.5 minutes, resulting in an estimated conversion rate of 99.99 %. This prediction was validated by experimental findings, with regression analysis confirming a high correlation (R 2 > 0.99) between the predicted and observed values. Additionally, the Fe 3 O 4 @AC catalyst demonstrated good recyclability and stable performance over three consecutive cycles, maintaining high conversion efficiency without loss of performance. These findings demonstrate that Fe 3 O 4 @AC is a viable approach for the rapid and efficient remediation of dyes in water.

Modified Dolomite as an Efficient Catalyst in the Fenton Process: Kinetics, Thermodynamics and Modelling Using Central Composite Design

The Catalytic Degradation Performance of Α-Feooh Doped with Silicon on Methyl Orange

Iron-doped catalyst synthesis in heterogeneous Fenton like process for dye degradation and removal: optimization using response surface methodology

Fenton-like oxidation of flexographic water-based key (black) dye: a definitive screening design optimization

Decolorization and Degradation of Methyl Orange Azo Dye in Aqueous Solution by the Electro Fenton Process: Application of Optimization

Preparation of powerful exchanged Faujasite zeolite materials used as effective heterogeneous catalyst for photo-Fenton oxidation of methyl orange (MO)

Removal enhancement of persistent basic fuchsin dye from wastewater using an eco-friendly, cost-effective Fenton process with sodium percarbonate and waste iron catalyst

Catalytic degradation of crystal violet and methyl orange in heterogeneous Fenton-like processes

Degradation of aqueous organic dye pollutants by heterogeneous photo-assisted Fenton-like process using natural mineral activator: Parameter optimization and degradation kinetics

Modeling of heterogeneous fenton process using catalyst produced from date palm waste for dye removal: Catalyst characterization and process optimization

Typical synthesis of an iron-modified Laponite @diatomite composite for photo-Fenton degradation of methyl orange dyes

The decolorization of Acid Orange II in non-homogeneous Fenton reaction catalyzed by natural vanadium-titanium magnetite

Optimizing catalytic performance: Reduction of organic dyes using synthesized Fe 3 O 4 @AC magnetic nano-catalyst

Effect of the Catalyst Support on Dye Degradation Using Advanced Oxidation Processes Treatment: Application of the Fractional Factorial Design

Central composite design optimization of Bismarck Dye oxidation from textile effluent with Fenton’s reagent

Enhanced Removal of Dye from Wastewater by Fenton Process Activated by Core-Shell NiCo2O4@FePc Catalyst

Preparation of a Novel Copper–Cobalt Composite Catalyst and Study on Performance Degradation of Methyl Orange

Modification of α-Fe2O3 Nanoparticles with Carbon Layer for Robust Photo-Fenton Catalytic Degradation of Methyl Orange

Statistical modeling and optimization of heterogeneous Fenton-like removal of organic pollutant using fibrous catalysts: a full factorial design

Comparative investigation on the removal of methyl orange from aqueous solution using three different advanced oxidation processes

Synergistic Effect of Iron and Copper Oxides in the Removal of Organic Dyes Through Thermal Induced Catalytic Degradation Process