Abstract:This article presents a sustainable method for the catalytic reduction of both simple and binary dye systems using magnetic activated carbon (Fe 3 O 4 @AC) synthesized from almond shells, an agricultural waste biomass. The reduction of methylene blue (MB) and Congo red (CR) was investigated in the presence of NaBH 4 , and a series of physical-chemical experiments were conducted to elucidate the mechanism of dye conversion and its performance. The results confirmed the successful synthesis of Fe 3 O 4 nanoparticles on the activated carbon surface. The calculated rate constants in a simple system were 0.34 min− 1 for MB and 0.25 min− 1 for CR, in the binary system, the Fe 3 O 4 @AC catalyst demonstrated enhanced selectivity for the cationic MB dye, attributable to the robust, attractive surface charge. The study aimed to enhance catalytic performance by employing optimization curves generated from a three-level Box-Behnken Design (BBD) simulation. Experimental results indicated that the optimal catalyst dose, dye concentration, and reaction duration were 4–7 mg, 80–120 mg/L, and 5–20 min, respectively. Response surface methodology (RSM) was developed by processing the findings from 17 replicated experiments using a two-quadratic polynomial model, establishing a functional link between the experimental parameters and MB conversion. Optimal conditions for MB conversion were determined to be 7 mg of catalyst, 80 mg/L of MB concentration, and a reaction time of 12.5 minutes, resulting in an estimated conversion rate of 99.99 %. This prediction was validated by experimental findings, with regression analysis confirming a high correlation (R 2 > 0.99) between the predicted and observed values. Additionally, the Fe 3 O 4 @AC catalyst demonstrated good recyclability and stable performance over three consecutive cycles, maintaining high conversion efficiency without loss of performance. These findings demonstrate that Fe 3 O 4 @AC is a viable approach for the rapid and efficient remediation of dyes in water.

Effect of the Catalyst Support on Dye Degradation Using Advanced Oxidation Processes Treatment: Application of the Fractional Factorial Design

Modified Dolomite as an Efficient Catalyst in the Fenton Process: Kinetics, Thermodynamics and Modelling Using Central Composite Design

Ni doped zinc oxide nanoparticles supported bentonite clay for photocatalytic degradation of anionic and cationic synthetic dyes in water treatment

Sustainable and Green Synthesis of Iron Nanoparticles Supported on Natural Clays via Palm Waste Extract for Catalytic Oxidation of Crocein Orange G Mono Azoic Dye

Heterogeneous Photo-Fenton Degradation of Azo Dyes over a Magnetite-Based Catalyst: Kinetic and Thermodynamic Studies

Degradation of aqueous organic dye pollutants by heterogeneous photo-assisted Fenton-like process using natural mineral activator: Parameter optimization and degradation kinetics

Iron-doped catalyst synthesis in heterogeneous Fenton like process for dye degradation and removal: optimization using response surface methodology

Catalytic Reduction of Congo Red to Low-Toxicity Forms Using a Low-Cost Catalyst Based on Modified Bentonite Material

Synergistic Effect of Iron and Copper Oxides in the Removal of Organic Dyes Through Thermal Induced Catalytic Degradation Process

Optimizing catalytic performance: Reduction of organic dyes using synthesized Fe 3 O 4 @AC magnetic nano-catalyst

The multiple role of inorganic and organic additives in the degradation of reactive green 12 by UV/chlorine advanced oxidation process

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study

A Novel Strategy for Preparation of an Effective and Stable Heterogeneous Photo-Fenton Catalyst for the Degradation of Dye

Removal of acid red dye 1 from textile wastewater by heterogenous photocatalytic ozonation employing titanium dioxide and iron zeolite

Modeling of heterogeneous fenton process using catalyst produced from date palm waste for dye removal: Catalyst characterization and process optimization

Comparative investigation on the removal of methyl orange from aqueous solution using three different advanced oxidation processes

Photocatalytic degradation and photo-Fenton oxidation of Congo red dye pollutants in water using natural chromite—response surface optimization

Green Chemical Oxidation Using Iron Nanoparticles for Removal of Azo Dye in Simulated Wastewater: Kinetics and Thermodynamics

Investigating the effect of hydrogen peroxide as an electron acceptor in increasing the capability of slurry photocatalytic process in dye removal.

Clay-Supported Metal Oxide Nanoparticles in Catalytic Advanced Oxidation Processes: A Review

Degradation of Rhodamine B in Wastewater by Iron-Loaded Attapulgite Particle Heterogeneous Fenton Catalyst