Abstract:This study investigates the decolorization of two widely used textile dyes (Acid Black 172 (AB172) and Disperse Blue 56 (DB56) by using a combined sono-photo-electro-Fenton (SPEF) process. The effects of dye structure and processing factors on dye degradation from contaminated water and COD removal efficiency were determined by adopting response surface methodology. The results confirmed that current density, irradiation time, pH, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), and AB172 concentration had the most impacts on COD removal, respectively, whereas DB56 removal efficiency was highly dependent on the initial dye concentration and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), compared to other processing factors. The dye degradation efficiency of 95.5% and COD removal efficiency of 91.6% for DB56 were obtained at optimum conditions of pH = 3, current density = 2 mA.cm−2, dye concentration = 200 ppm, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.78 and irradiation time of 30 min. In the case of AB172, the same optimum conditions were found unlike reaction time of 50 min and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.33, which resulted in the optimal dye degradation efficiency and COD removal of 97.4% 94.5%, respectively. These results verified that the type of dye and its structure can be a key factor in the Fenton-based degradation process. The comparison of the performance of different Fenton-based processes confirmed that the removal efficiency of electro-Fenton, sono-electro-Fenton, photo-electro-Fenton, and SPEF was 82–88%, 89.5–91%, 91.5–92.3% and 95.5–97.4%, respectively. The Fenton-based processes are highly effective methods that can be applied for water and wastewater treatment.Graphic

Central composite design optimization of Bismarck Dye oxidation from textile effluent with Fenton’s reagent

Application of Box–Behnken factorial design for parameters optimization of basic dye removal using nano-hematite photo-Fenton tool

Solar photo-Fenton reagent with nanostructured iron oxide for Bismarck dye oxidation: an Egyptian apparel case study

Decolorisation of textile wastewater using biosynthesised iron oxide nanomaterials and Optimisation by Response Surface Methodology

Comprehensive study of Fenton reaction efficiency on textile wastewater treatment from dye solution to real effluent with emphasis on Fukui function analysis

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Combination of catalytic ozonation by regenerated granular activated carbon (rGAC) and biological activated carbon in the advanced treatment of textile wastewater for reclamation.

Magnetite-based nanoparticles as an efficient hybrid heterogeneous adsorption/oxidation process for reactive textile dye removal from wastewater matrix

Doehlert matrix-based optimization of degradation of Rhodamine B in a swirling flow photolytic reactor operated in recirculation mode

Green Chemical Oxidation Using Iron Nanoparticles for Removal of Azo Dye in Simulated Wastewater: Kinetics and Thermodynamics

RESPONSE SURFACE METHODOLOGY APPLIED TO ELECTRO-FENTON PROCESS FOR DEGRADATION OF RED BEMACID AS TEXTILE DYE MODEL

Treatment of Reactive Orange 16 Dye-Bearing Wastewater by Electro-Fenton Process with Stainless-Steel Electrodes: Statistical Optimization and Operational Analysis

Application of Fenton's Reagent in the Textile Wastewater Treatment Under Industrial Conditions

Removal of Neutral Red Dye via Electro-Fenton Process: A Response Surface Methodology Modeling

Photocatalytic degradation of textile dyes laden industrial wastewater using fabricated bismuth ferrite coated nickel/nickel oxide foam

Removal enhancement of persistent basic fuchsin dye from wastewater using an eco-friendly, cost-effective Fenton process with sodium percarbonate and waste iron catalyst

Decolorization and Degradation of Methyl Orange Azo Dye in Aqueous Solution by the Electro Fenton Process: Application of Optimization

468 https://doi.org/10.31881/TLR.2024.010 Decolourization of Synthetic Wastewater Related to the Textile Industry Using Photo-Fenton

Optimizing catalytic performance: Reduction of organic dyes using synthesized Fe 3 O 4 @AC magnetic nano-catalyst

Investigation and optimization of the performance of sono-photo-electro-Fenton process for removal of Acid Black 172 and Disperse Blue 56 from polluted water: comparison of the degradation activity with electro-Fenton-based processes

Fenton-like oxidation of flexographic water-based key (black) dye: a definitive screening design optimization